FLASHFORGE Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer — Open-Box, 18% Off
Brand: FLASHFORGE
Description
True Multi-Color with Zero Purge Waste: Equipped with 4 independent toolheads and a 7s FlashSwap changer, the Creator 5 Pro swaps nozzles instead of flushing filament — no purge towers, no wasted material, and no color cross-contamination. Multi-color printing runs up to 5X faster than single head printer, saving filament cost on every single print
65°C Active Heated Chamber for Engineering-Grade Materials: Fully enclosed metal frame maintains a stable 65°C chamber temperature that prevents warping and layer-adhesion failure. Print ABS, ASA, PC, PA (Nylon) and other advanced filaments with confidence year-round — in any room temperature — and produce robust, professional-grade parts
600mm/s CoreXY Speed with Industrial Precision: The rigid all-metal frame, precision linear rails and 1.5GT high-torque belts deliver 600mm/s print speed with 30,000mm/s² acceleration — fast enough for high-throughput work, precise enough for detail-critical models. Auto bed leveling, toolhead offset calibration, vibration compensation and dynamic flow calibration guarantee a flawless first layer every time
HEPA 13 + Activated Carbon Filtration for Safe Indoor Printing: Enclosed Design and dual-layer filtration capture 99% of ultrafine particles and neutralize fumes, keeping your workspace clean, odor-free and healthy — ideal for offices, classrooms and homes. The adaptive air circulation protects prints from drafts while preventing nozzle clogging
Smart, Easy and Fully Connected: Quick nozzle changes — just loosen two screws with a hex wrench; a flexible PEI magnetic build plate and a 4-inch full-color touchscreen make every print effortless. Filament run-out/tangle sensors and door-open detection prevent failed prints, while the built-in HD chamber camera, time-lapse recording and the Flash Studio app (desktop & mobile) let you monitor and control prints from anywhere — compatible with Orca Slicer
Meet the FLASHFORGE Creator 5 Pro — the flagship enclosed 4-toolhead 3D printer built for makers, engineers, educators and small businesses who demand professional results without compromise. WHY TOOL-CHANGING CHANGES EVERYTHING Most multi-color printers push four filaments through a single nozzle, purging 10-30% of every spool as waste on color transitions. The Creator 5 Pro does it differently: four independent toolheads with the 7-second FlashSwap changer physically swap nozzles, so each color stays in its own head. No purge towers. No wasted filament. No color mixing. Just clean, true multi-color and multi-material printing — up to 5X faster than single head multicolor-style systems. ENGINEERING-GRADE, ANY SEASON A fully enclosed frame with active chamber heating up to 65°C creates a stable thermal environment that prevents warping and layer-adhesion failure. Print ABS, ASA, PC, PA (Nylon) and other advanced filaments with confidence in any room temperature — and produce robust, professional-grade industrial parts right from your desk. SPEED YOU CAN TRUST The rigid all-metal frame, CoreXY motion system, precision linear rails and 1.5GT high-torque belts deliver 600mm/s print speed with 30,000mm/s² acceleration — fast enough for high-throughput production, precise enough for detail-critical models. Auto bed leveling, toolhead offset calibration, vibration compensation and dynamic flow calibration handle the fine-tuning for you. SAFE FOR ANY WORKSPACE The sealed enclosure with HEPA 13 and activated carbon dual-layer filtration captures 99.97% of ultrafine particles and neutralizes fumes, so you can print confidently in offices, classrooms and homes. The adaptive outside-in air circulation keeps the chamber draft-free and prevents nozzle clogging. MADE FOR EFFORTLESS USE Tool-less nozzle swaps in under 30 seconds, a flexible PEI magnetic build plate for easy part removal, filament run-out and tangle sensors, door-open detection and a 4-inch full-color touchscreen keep every print stress-free. Monitor and control your printer from anywhere with the built-in HD camera, time-lapse recording and the Flash Studio app for desktop and mobile — compatible with Orca Slicer. SPECIFICATIONS Build Volume: 256 x 256 x 256 mm Max Print Speed: 600 mm/s (acceleration 30,000 mm/s²) Toolheads: 4 independent (FlashSwap, 7-second swap) Active Chamber Temperature: up to 65°C Nozzle Temperature: up to 320°C | Heated Bed: up to 120°C Filtration: HEPA 13 + Activated Carbon Build Plate: Flexible PEI Magnetic Connectivity: WiFi / USB + Flash Studio app (desktop/mobile) Slicer: Flash Studio / Orca Slicer Dimensions: 20.35 x 21.06 x 19.5 in | Weight: 39.8 lbs Upgrade your workflow with the FLASHFORGE Creator 5 Pro — where zero-waste multi-color printing meets industrial reliability.
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-us-b0h6zkgmxm
- Model:
- SZ-C5PRO-1
- Country:
- US
- ASIN:
- B0H6ZKGMXM
Shopping Smarter
Common questions about buying open-box and refurbished.



















