FENNICA Universal Easy Intake Adapter for Smoke Machine Automotive, Inflatable Air Bladder for 12V Vehicle Pipes Fuel Leakage Detector Diagnositc Tester — Open-Box, 47% Off

【INFLATABLE SEAL BLADDER】 Featuring an inflatable bladder, our smoke machine intake adapter creates a secure seal on pipes during smoke testing. In addition, this Smoke Machine Bladder Adapter is made of excellent quality silicone gel which can provide better seal, softness and elasticity as well as endure high temperature and strong tear. 【WIDELY COMPATIBLE】 Smoke machine inflatable bladder adapter for intake and exhaust smoke testing. It can be used on any vehicle and light truck. Compatible with all EVAP system smoke leak detectors for improved leak detection and realize quick repair. 【EASY TO OPERATE】 This easy intake adapter with automotive smoke machine leak detector to fill the smoke, and then blow the smoke into the sealed piping system, through the smoke can find the leakage point in the pipeline, to repair the leakage existed in the area. It can enhance your leak detection efficiency and realize quick repair. 【WIDELY APPLICABLE】 This smoke machine intake adapter suitable for intake/exhaust ports (diameter is within 2" to 5.5") of any shape: round, oval, square, rectangular, and even severely tilted and difficult to touch. Helps you complete tests quickly and easily. 【INCLUDES SPARE BLADDER】 This smoke machine bladder comes with a spare bladder and mounting kit, if your bladder is excessively worn after many uses or accidentally breaks, you use the spare bladder to replace it. Note: If the inflatable airbag for smoke test you received has quality problems, you can directly contact us for a free replacement. 【SERVICE GUARANTEE】 For the damage caused by non-human factors, we promises to resend the parts for free within 3 years. For any demand, please feel free to contact us, and we will reply you asap within 8 hours.

* If the bladder/rubber of your Smoke Machine Inflatable Bladder is broken or splits, you can use the spare rubber as a replacement.

Product Specifications

Material: High-quality silicone

Diameter: About 39mm/1.51in

Length: About 115mm/4.53in, suitable for intake/exhaust diameters from 2 inches to 5.5 inches

Shape Suitability: Suitable for intake/exhaust ports of any shape (round, oval, square, rectangular, severely tilted, and hard-to-reach areas)

Packing List:

1 * 1 x Smoke Tester Automotive Intake Bladder & 1 x Spare Rubber

Attention:

1. Please allow 1cm error due to manual measurement. pls make sure you do not mind before you bid.

2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

3. Please Clean the inner wall of the intake opening while the Air Filter, and the Throttle connections are removed,so as not to scratch the adapter.

4. This smoke machine intake adapter is suitable for the universal intake adapter only !!!

Universal Inatake Adapter Smoke Machine Automotive Bladder Advantages:

●Fit most cars and light trucks

●Quick seal intake/exhaust easily

●Reduce workload in a leak check

●Fits any shape of intake/exhaust (diamter greater than 2"): round,oval,square,rectangular and even severelly angled and hard to reach intake/exhaust systems

●Work with any brand of smoke machine or diagnostic leak detectors

Quick Start Instruction:

1. Clean the inner wall of the intake opening while the Air Filter, and the Throttle connections are removed, so as not to scratch the adapter.

2. Close the Pressure Relief Valve(A) next to the Hand Pump(B).

3. Put the Rubber Component(C) into the intake opening.

4. Inflate the Rubeber Component(C) by pressing the Hand Punm(B) till the intake opening is tightli sealed.

5. Now the system is ready to test,introduce air/smoke into the system by plug the smoke nozzle into the Tube Opening(D).

6. After test,pull off the smoke nozzle,release the inflated air by open the Pressure Relief Valve(A) next to the Hand Pump(B).

7. Clean the adapters for smoke machine for storage,avoid contact with corrosive liquids.