Add to favorites
EZROAD 1204M-5305 36-48V 325A 0-5K DC Motor Controller Compatible with Curtis Programmable PMC Compatible with EZGO Club Car Golf Cart Speed Control Program Electric Vehicle Truck Work Platform — Open-Box, 20% Off
Brand: EZROAD
Condition: Used - VeryGood
$9400
$11750
-20% Save $2350
Updated: 7 days ago
Description
Model: 1204M-5305
36V / 48V, 325A, 0-5kΩ, Programmable.
Note: This unit is pre-configured for 48V, 325A, 0-5K. To adapt it for other models, reprogramming via handheld programmer is required.
EZROAD 1204M-5305 Controller provide fully programmable control of DC series motors performing on-vehicle traction or pump duties. Primarily designed for battery-powered vehicle applications using either electric or hydrostatic traction. These include industrial trucks, personnel carriers, mobile elevating work platforms, and golf and utility vehicles.
This is an aftermarket part, not an original. It is compatible with your device and will function like the original.
Model: 1204M-5305 Programmable DC Motor Controller
Specification:
Voltage: 36V / 48V
Current Limited: 2 Min 325A, 1 Hour 140A
Throttle Type: 0-5kΩ
EZROAD Programmable 1204M-5305 electronic motor speed controllers are designed to provide smooth, silent, cost-effective control of motor speed and torque on a wide variety of industrial electric vehicles.
This is an aftermarket part, not an original. It is compatible with your device and will function like the original.
After purchase, please contact our online support team for the installation guide PDF and additional product details.
Key features of the EZROAD 1204M-5305 controllers include:
Universal logic board supports multiple throttle types and high pedal disable (HPD) options.
1.Protection provided by rugged anodized aluminum extruded housing.
2.Simple mounting and wiring with push-on connectors for control signals.
3.Plated solid copper buses used for all power connections.
4.Thermal protection and compensation circuit provides constant current limit over operating range and during under/over temperature cutback; no sudden loss of power under any thermal conditions.
5.Throttle fault protection circuitry disables controller if throttle wires become open.
6.HPD feature prevents controller operation if key is turned on while throttle is applied.
7.Plug braking diode internal to controller.
8.Undervoltage cutback function protects against low battery voltage, including low voltage caused by external loads.
9.Easily programmable through the handheld programmer 1313-4331 or 1314 PC programming station.
Connections:
This is an upgraded controller featuring a J4 connector, designed for status LED indication or programming interfaces.
These controllers have five low-current connections: four 6.35 mm push-on terminals (J1, J2, J3, and J5), and one 4-pin connector (J4).
J1: Keyswitch.
J2: Wire 1 of 2-wire throttle; Pot High of 3-wire or ITS throttle.
J3: Wire 2 of 2-wire throttle; Pot Wiper of 3-wire throttle; Pot Low of ITS thottle; or electronic throttle input.
J4: 4-pin connector, an external Status LED or a programmer can be connected to J4. Note: When J4 is used for a Status LED, a jumper must be added between pins J4-1 and J4-4.
J5: Reverse signal output / main contactor coil driver.
Looking for parts compatible with Curtis controllers? Our inventory includes a comprehensive range of compatible parts. Simply enter your model or part number to find the exact match in our store. Our product specialists are available for support.
Specification:
Voltage: 36V / 48V
Current Limited: 2 Min 325A, 1 Hour 140A
Throttle Type: 0-5kΩ
EZROAD Programmable 1204M-5305 electronic motor speed controllers are designed to provide smooth, silent, cost-effective control of motor speed and torque on a wide variety of industrial electric vehicles.
This is an aftermarket part, not an original. It is compatible with your device and will function like the original.
After purchase, please contact our online support team for the installation guide PDF and additional product details.
Key features of the EZROAD 1204M-5305 controllers include:
Universal logic board supports multiple throttle types and high pedal disable (HPD) options.
1.Protection provided by rugged anodized aluminum extruded housing.
2.Simple mounting and wiring with push-on connectors for control signals.
3.Plated solid copper buses used for all power connections.
4.Thermal protection and compensation circuit provides constant current limit over operating range and during under/over temperature cutback; no sudden loss of power under any thermal conditions.
5.Throttle fault protection circuitry disables controller if throttle wires become open.
6.HPD feature prevents controller operation if key is turned on while throttle is applied.
7.Plug braking diode internal to controller.
8.Undervoltage cutback function protects against low battery voltage, including low voltage caused by external loads.
9.Easily programmable through the handheld programmer 1313-4331 or 1314 PC programming station.
Connections:
This is an upgraded controller featuring a J4 connector, designed for status LED indication or programming interfaces.
These controllers have five low-current connections: four 6.35 mm push-on terminals (J1, J2, J3, and J5), and one 4-pin connector (J4).
J1: Keyswitch.
J2: Wire 1 of 2-wire throttle; Pot High of 3-wire or ITS throttle.
J3: Wire 2 of 2-wire throttle; Pot Wiper of 3-wire throttle; Pot Low of ITS thottle; or electronic throttle input.
J4: 4-pin connector, an external Status LED or a programmer can be connected to J4. Note: When J4 is used for a Status LED, a jumper must be added between pins J4-1 and J4-4.
J5: Reverse signal output / main contactor coil driver.
Looking for parts compatible with Curtis controllers? Our inventory includes a comprehensive range of compatible parts. Simply enter your model or part number to find the exact match in our store. Our product specialists are available for support.
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-us-b0f2z51282
- Model:
- 1204M-5305
- Country:
- US
- ASIN:
- B0F2Z51282
Shopping Smarter
Common questions about buying open-box and refurbished.
Why buy refurbished or open-box?
Refurbished and open-box products offer the same performance as new at a fraction of the price. You're already saving $24 on this listing. They've been inspected, tested, and are ready to use — the only difference is the price tag. Buying refurbished also reduces electronic waste, extending product life cycles and keeping functional devices out of landfills.
What's the difference between open-box and refurbished?
Open-box products are customer returns that have been inspected and confirmed functional. They may show little to no use — often the item was returned simply because the buyer changed their mind. Refurbished products have been professionally repaired or restored by technicians, tested to meet or exceed manufacturer specifications, and sometimes come with a warranty. Both are a smart alternative to buying new.
Why use OpenBoxFox?
Finding refurbished deals is time-consuming — you'd have to check Amazon Warehouse, Reebelo, Dyson Outlet, and others separately for EZROAD products. OpenBoxFox aggregates these listings in one place, so you can compare and find the best deal without the legwork. We update pricing daily so you always see current availability and real savings.
Is it safe to buy refurbished?
Yes. Products listed on OpenBoxFox come from established retailers like Amazon, Reebelo, and Dyson — not unknown third-party sellers. Each retailer has buyer protection policies, return windows, and in some cases warranties. You get the price advantage of used goods with the purchase security of a known retailer.
