Electro-Voice EVID C8.2HC 100W 8 inch Coaxial High-Ceiling Install Speaker (Pair) - White

The Electro-Voice EVID C8.2HC 8 inch 2 Way Coaxial In-Ceiling Speaker utilizes a transformer that offers a selection of 7.5 (70V only), 15, 30 or 60 watts delivered to the loudspeaker system using either 70V or 100V lines, or 8 ohm bypass. It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of.

White semi-gloss perforated grille. Waveguide-coupled 1-inch titanium-coated tweeter.

Integrated transformer for 70 , 100V, or 8 Ω use.

Maximum fidelity and intelligibility for high ceilings.

The package consists of a bezel/waveguide assembly, grille, rear enclosure, 8" coax two-way loudspeaker with waveguide coupled titanium coated dome tweeter and internal line-matching transformer.

The Electro-Voice EVID C8.2HC is an 8" coaxial transducer featuring an innovative waveguide (patent pending) that provides directivity control to 1 kHz. It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. Its 75° coverage pattern provides the same coverage area when used in a 21’ ceiling as a typical flush mount mounted unit in an 8’ ceiling. This loudspeaker system is a complete two-way ceiling loudspeaker package. The package consists of a bezel/waveguide assembly, grille, rear enclosure, 8" coax two-way loudspeaker with waveguide coupled titanium coated dome tweeter and internal line-matching transformer. The C8.2HC utilizes a transformer that offers a selection of 7.5 (70 V only), 15, 30 or 60 watts delivered to the loudspeaker system using either 70 V or 100 V lines, or 8 ohm bypass. Selection is via a convenient switch on the front of the waveguide. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure, with fiberglass damping material, provides an optimum internal volume for extended low frequency performance. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C8.2HC ceiling system in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles. The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide controlled dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.