EcoKitchen5Stars Pull-Down Kitchen Faucet Head Replacement, 3-Function Sprayer, G1/2 Thread (13/16 in OD) with 15 Adapters, for Standard Threaded Hoses, Not for Magnetic Dock Faucets, Brushed Nickel — Open-Box, 9% Off

1. CHECK YOUR HOSE FIRST: connects using the included standard G1/2 adapter, male thread outer diameter 13/16 in (20.5 mm). It is not a 1/2 in NPT fitting. Unscrew your old head and check the female nut on your hose before ordering. Not sure? Send us a photo of your hose end and we will confirm fit before you buy 2. NOT FOR MAGNETIC OR QUICK-CONNECT DOCKS: if your sprayer snaps back into the spout with a magnet (Moen MagnetiX, Delta MagnaTite, Kohler DockNetik) or clips on without threads, this head will not dock. Standard threaded pull-down hoses only. Not for pull-out, fixed, or bathroom faucets, and not compatible with Pfister, Glacier Bay, or RV faucets. 3. THREE SPRAY MODES, ONE BUTTON: steady stream for filling pots, wide spray for rinsing, and a strong blade mode for stuck-on food. Water-saving 1.8 GPM aerated flow that keeps splashing down. Note: there is no pause button; modes switch with the single press button. 4. COMPLETE 15-ADAPTER KIT: 15 labeled thread adapters with built-in seal washers, aerator key, cleaning brush and an illustrated guide. Good to know: a brief drip for about three seconds when you switch modes is normal while the valve resets. 5. SOLID 110 GRAM BUILD, BRUSHED NICKEL FINISH: rustproof ABS engineering plastic with a brushed metal-look finish, not a solid metal head, upgraded to nearly twice the weight of typical replacement heads for a sturdier feel. Backed by a 6-month warranty and responsive support.

This is a replacement spray head for pull-down kitchen faucets with a standard threaded hose. It connects through the included adapters: the standard one is a G1/2 male thread with a 13/16 in (20.5 mm) outer diameter, and the 15 labeled adapters cover hoses that need a different thread. Before ordering, unscrew your current spray head and look at the hose end: if it has a plain female threaded nut, you can match it here. If it snaps on with a magnet or a quick-connect collar, this head is not for your faucet.

You get three modes from one button: a steady stream for filling, a wide spray for rinsing, and a high-intensity blade mode for stuck-on food. There is no pause button. Flow is 1.8 GPM, so it saves water while the multi-mesh aerator keeps the stream quiet and splash-free. The head is made of rustproof ABS engineering plastic with a brushed nickel finish and weighs 110 grams (about 4 ounces), upgraded to nearly twice the weight of typical replacement heads, though still lighter than a metal OEM head.

Installation takes a few minutes without tools: unscrew the old head, match your thread or pick the right adapter, add the included Teflon tape, and screw the new head on. A short drip for about three seconds when switching modes is normal while the internal valve resets. If anything about fit is unclear, message us with a photo of your hose end and we will tell you honestly whether it fits before you spend anything.