𝑼𝒑𝒈𝒓𝒂𝒅𝒆𝒅 EC-520555 Pool Salt Cell Chlorine Generator, IC40 Salt Cell Chlorine Generator Replacement for Pentair Intellichlor IC40 Pool Chlorinator, for 40K Gallon Water Automation System — Open-Box, 14% Off

🏊‍♀️【Compatibility with Original System】Compatible with Pentair IntelliChlor IC40, it is an ideal replacement for original electrodes. Same high-quality chlorination effect as the original version, replacement part number: 520555/EC-520555 🏊‍♀️【Upgraded Electrolysis Technology】Adopting newly upgraded electrolysis technology, the purification process is gentler, effectively reducing irritating chlorine odors and harmful by-products. Designed specifically for up to 40000 gallons of water, it keeps the pool water clear and bright 🏊‍♀️【Convenient Panel Control】This IC40 salt chlorine generator is equipped with an intuitive control panel that can clearly display the production rate, salinity, water temperature, working time, and fault codes of chlorine gas. The chlorine gas output and pressurization mode can be adjusted through panel buttons, with simple operation and stable performance. 🏊‍♀️【EC520555 Chlorine Generator】IC40 Salt Cell Chlorine Generator is made of upgraded high-quality PE material, which has superior flexibility and impact resistance, effectively avoiding accidental damage, extending service life, and reducing maintenance costs and frequency 🏊‍♀️【Reminders and services】Install the product in a cool, well ventilated place, or take shading measures to avoid direct sunlight. If you have any questions about the 520555 salt chlorination machine, we will reply within 24 hours. You can use it with confidence after purchasing

🏊‍♀️🏊‍♀️🏊‍♀️𝑪𝒉𝒍𝒐𝒓𝒊𝒏𝒆 𝑮𝒂𝒔 𝑮𝒆𝒏𝒆𝒓𝒂𝒕𝒊𝒐𝒏 𝑪𝒐𝒏𝒕𝒓𝒐𝒍

The output of chlorine gas can be precisely adjusted between 2% and 100% through the "More" and "Less" buttons on the control panel. If you need to run at full power continuously for 24 hours, you can simultaneously press and hold two buttons to start Boost Mode; Press again simultaneously to turn off the mode.

𝑨𝒖𝒕𝒐𝒎𝒂𝒕𝒊𝒄 𝑪𝒍𝒆𝒂𝒏𝒊𝒏𝒈 𝑭𝒖𝒏𝒄𝒕𝒊𝒐𝒏

The equipment automatically reverses the electrode polarity every 2 hours to reduce calcium deposition, and this frequency takes effect within the first 30 days of equipment operation. After 30 days, the system will automatically extend to perform polarity reversal every 3 hours, balancing cleaning efficiency and equipment lifespan.

𝑾𝒊𝑭𝒊 𝑪𝒐𝒏𝒏𝒆𝒄𝒕𝒊𝒐𝒏 𝒂𝒏𝒅 𝑺𝒎𝒂𝒓𝒕 𝑳𝒊𝒇𝒆 𝑨𝒑𝒑 𝑼𝒔𝒂𝒈𝒆

Download and install the Smart Life App (scan the QR code on page 8 of the manual), click on the "+" in the upper right corner of the app homepage, and scan QR Code 2 to add the device. Ensure that the Bluetooth and WiFi on your phone are turned on, enter the correct WiFi name and password, select "Salt Chlorine Device", click "Welcome to Use the Salt Chlorine" → "Confirm" → "Finish" to complete the binding. After successful binding, real-time viewing of water flow, water temperature, salt concentration, and device status can be achieved.

𝑺𝒂𝒍𝒕 𝑪𝒐𝒏𝒄𝒆𝒏𝒕𝒓𝒂𝒕𝒊𝒐𝒏 𝑺𝒕𝒂𝒏𝒅𝒂𝒓𝒅

The normal operation of the equipment requires a salt concentration maintained between 2800-4500 ppm, with an ideal value of 3600 ppm. If "SALT LOW" is displayed, salt needs to be replenished; If "SALT HIGH" is displayed, it should be diluted with fresh water. After adding salt, please ensure that the water pump runs continuously for at least 24 hours to completely dissolve and evenly distribute the salt before conducting concentration testing.

𝑨𝒃𝒏𝒐𝒓𝒎𝒂𝒍 𝑪𝒉𝒍𝒐𝒓𝒊𝒏𝒆 𝑮𝒂𝒔 𝑮𝒆𝒏𝒆𝒓𝒂𝒕𝒊𝒐𝒏 𝑻𝒓𝒆𝒂𝒕𝒎𝒆𝒏𝒕

Cold water shutdown: When the water temperature drops below 52 ° F (11 ° C), the equipment automatically stops producing chlorine. The water temperature needs to be raised to above 11 ° C, and the system will automatically resume operation.

No Flow: Check if the direction of water flow is consistent with the arrow on the casing; After disconnecting the pipeline connection, turn on the power separately and observe if "SALT CHECK" or "NO FLOW" is displayed. If there is still no traffic prompt, it may be a malfunction of the traffic sensor, and after-sales service should be contacted.

Abnormal salt concentration: Confirm that the salt concentration is within the standard range to avoid false alarms caused by local high or low concentrations.

𝑹𝒆𝒔𝒑𝒐𝒏𝒔𝒆 𝒕𝒐 𝑾𝒊𝑭𝒊 𝑪𝒐𝒏𝒏𝒆𝒄𝒕𝒊𝒐𝒏 𝑭𝒂𝒊𝒍𝒖𝒓𝒆

If unable to connect, press and hold the "Less" button for more than 5 seconds to reset the WiFi module and re pair through the app. Ensure that the router does not block devices, the signal strength is not less than -70 dBm, and the device is not more than 10 meters away from the router.

𝑺𝒄𝒓𝒆𝒆𝒏 𝑨𝒃𝒏𝒐𝒓𝒎𝒂𝒍𝒊𝒕𝒚 (𝒘𝒉𝒊𝒕𝒆 𝑺𝒄𝒓𝒆𝒆𝒏, 𝑭𝒍𝒊𝒄𝒌𝒆𝒓𝒊𝒏𝒈, 𝑺𝒏𝒐𝒘𝒇𝒍𝒂𝒌𝒆𝒔)

This is mainly due to long-term exposure of the equipment to high temperatures above 70 ° C (158 ° F). Please immediately turn off the power, move the device to a cool and ventilated place to cool down, and restart it after the temperature returns to normal. It is recommended to choose a shaded and well ventilated location during installation, or to install a sunshade cover.

𝑻𝒉𝒆 𝑫𝒆𝒗𝒊𝒄𝒆 𝒊𝒔 𝑼𝒏𝒓𝒆𝒔𝒑𝒐𝒏𝒔𝒊𝒗𝒆 𝒐𝒓 𝑻𝒖𝒓𝒏𝒆𝒅 𝑶𝒇𝒇

It may be caused by abnormal input voltage. Please confirm that the power supply is 110-240V AC, 50/60 Hz. If the voltage is below or above this range, the device will automatically shut down for protection and restart automatically after the voltage is restored.