DRIVECADDY 9-Pack 2.5" SFF Caddy Tray - fits Dell PowerEdge 17-14th Gen — Open-Box, 18% Off

README FIRST: The same PowerEdge server type can have two different sizes of the drive bay. Your server HAS TO HAVE smaller 2.9 inches Hot-Plug Drive Bay. This 2.5 inch Drive caddy supports ONLY 2.5-inch hard drives. Check that your PowerEdge Server or Drive Array is LISTED and supported COMPATIBILITY: 2.9 inch Drive Bay size. PowerEdge 17th Generation R470, R570, R670, R770, R7725xd, R6715, R7715, R6725, R7725. PowerEdge 16th Generation R260, R360, T560, R660, R6615, R6625, R7615, R7625, R760, R760xa, R760xs, R860, R960, HS5610, HS5620. COMPATIBILITY: 2.9 inch Drive Bay size. PowerEdge 15th Gen R350, R450, T550, R550, R650xs, R750xs, R650, R750, R750xa, R6515, R6525, R7515, R7525, XE8545, C6520 enclosure. PowerEdge 14th Gen R340, R440, R640, R740, R740xd, R840, R940, R940xa, R6415, R7415, R7425, XC Series appliances XC640-4, XC640-4i, XC740xd-24, XC940-24, XC6420-6 and C6620, C6420/25 Enclosure. READY TO INSTALL: DRIVECADDY hard drive trays include all the screws and hardware you need to install. We make our 17th-14th Generation server trays with sturdy material, inspect each one individually, and carefully pack them for safe shipping. NON-OEM/NON-ORIGINAL ACCESSORY PART; Compatibility with part numbers DXD9H and 0DXD9H. Supported ONLY Hot-Plug small 2.9-inch Drive Bay. NOT compatible when your server has a bigger 4.2-inch drive bay 2-Year Product Warranty: Designed for long-term, reliable use. Our seller support team is available to assist with compatibility questions and installation support throughout the product’s lifetime.

Quick and easy setup with the DRIVECADDY hot-plug caddy

Press the release button to open the handle, then slide the hot-plug caddy into or out of the server. The DRIVECADDY 2.5-inch hot-plug tray is designed for connecting a hard drive (SAS/SATA/SSD/NVMe, depending on your server and backplane) to a server backplane. If your server backplane is connected to a RAID controller (such as Dell PERC), RAID volumes can be created or adjusted through the controller configuration menu after installation.

Design and packaging

• DRIVECADDY 9-pack drive enclosure brackets
• Compatible with Dell PowerEdge 2.5-inch drive bays for SAS/SATA/SSD/NVMe drives (depending on system configuration)
• Front sticker labels
• 36 mounting screws
• Screwdriver
• Tweezers

PowerEdge servers may use different drive bay sizes. Please verify that your server supports the smaller 2.9-inch hot-plug drive bay before purchase.

PowerEdge 17th Generation – smaller 2.9-inch hot-plug drive bay
R470 tray, R570 frame, R670 caddy, R770 tray, R6715 mount, R6725 case, R7715 bracket, R7725 caddy, R7725xd sled

PowerEdge 16th Generation – smaller 2.9-inch hot-plug drive bay
T560 caddy, R660 tray, R6615 frame, R6625 enclosure, R7615 holder, R7625 carrier, R760 case, R760xa chassis, R760xs mount, R860 bracket, R960 framework, HS5610 support, HS5620 caddy

PowerEdge 15th Generation – smaller 2.9-inch hot-plug drive bay
R350 tray, R450 frame, T550 enclosure, R550 holder, R650xs carrier, R750xs case, R650 chassis, R750 mount, R750xa bracket, R6515 framework, R6525 support, R7515 caddy, R7525 tray, XE8545 frame

PowerEdge 14th Generation – smaller 2.9-inch hot-plug drive bay
R340 enclosure, R440 holder, R640 carrier, R740 case, R740xd chassis, R840 mount, R940 bracket, R940xa framework, R6415 support, R7415 caddy, R7425 tray

Other systems – smaller 2.9-inch hot-plug drive bay
XC Series appliances: XC640-4, XC640-4i, XC740xd-24, XC940-24, XC6420-6
C6520, C6620, C6420/25 enclosure