Dreyoo Squeaky Floor Repair Kit with 5 Tools and 50 Screws, Eliminates Floor Squeak Fit Most Carpet Hardwood Floors, Woodworking Project Kits Use for Stopping Squeaky

🛠【Floor Repair Kit】here's an effective solution to floors; The floor repair kit connects the floor and the joist by driving nails into the wood, nicely preventing the creaking noise caused by the inability of the wood to be fixed; The woodworking project kit is suitable for most carpets, vinyl floors or hardwood floors 🛠【Floor Repair Kit Include】1 x alignment and depth control fixture; 1 x snap fixture; 1 x driver bit; 2 x Joist finding tools; 50 x scored screws; These accessories can meet your floor repair needs, no need to buy additional 🛠【Steps for Usage】attached a detailed instruction manual to guide the specific use process; The use is also very simple; The first step is to use the joist finding tool to find the joist of the floor; The second step is to use the alignment and depth control fixture to hammer the nails into the floor and the joist to connect the floor and the joist; The third step is to use the tool to twist off the excess parts of the scored screws 🛠【Exquisite Workmanship】the floor repair kit itself has strong corrosion resistance, it is not easy to rust in a humid environment, has toughness, and is not easy to bend; The thread is clear and the bite force is stronger 🛠【Simple Installation】the installation is simple and convenient; You do not need to find a professional maintenance worker, you can solve the problem of creaking wooden boards by yourself
For Carpeted Floors

step 1: in the area of , find the joist from above the floor using the joist finding tool in the kit. Then push the alignment and depth control fixture firmly into the carpet.

step 2: using the driver bit provided to drive the screw down as far as the fixture will allow.

step 3: slip the screw gripper over the screw head and rock the fixture left to right, snapping the head off. The screw breaks at the score that is set slightly below the wood of the floor.

step 4: there is no breakdown to the carpet and nothing to feel with your bare foot.

For Hardwood Floors

step 1: in the area , pre dill a hole with a 1/8 inch drill bit.

step 2: drive the screw through the fixture as far as it will go.

step 3: the thread pattern on the screw pulls the wood tight together.

step 4: the head of the screw hits the top of the fixture and snaps 3/8 of an inch below the surface.

step 5: fill the small hole with wood filler.

Products include:

1 x Alignment and depth control fixture

1 x Snap fixture

1 x Driver bit

2 x Joist finding tool

50 x Scored screws

These accessories can meet your floor repair needs, no need to buy additional.