DG47-00068A Broil Element Compatible with samsung Electric Range — Open-Box, 14% Off

►►The DG47-00068A heating element features an internal resistance wire, magnesium oxide powder coating, a 304 stainless steel shell, insulating filler, and end insulation. This range broil element boasts a long lifespan, rapid heating, high efficiency, and excellent resistance to oxidation and corrosion, making it suitable for high-temperature oven environments. Voltage/Power: Designed for AC 240V drive. The DG47-00068A has a wire terminal at each end for connecting to the oven's internal wiring harness, facilitating installation and removal. Ensure good contact between the terminals and the oven's power socket during wiring.

►►The sheath heater dg47-00068a is compatible with many samsung electric oven models, such as NE59J7630SB/AA, NE59J7630SG/AA, and NE59J7630SS/AA, NE59J7630SW/AA, NE59J7650WS/AA, NE59J7750WS/AA, NE59J7750WS/AC, NE59J7850WG/AA, NE59J7850WS/AA, NE59M6850SG/AA, NE59M6850SS/AA, NE59N6630SG/AA, NE59N6630SS/AA, NE59N6650SG/AA, NE59N6650SS/AA, etc. For more models, please refer to the images or product details section. This samsung dg47-00068a can replace AP5967647, 4010991, PS11720673, EAP11720673, ASM486907, PD00065857. During installation, ensure model compatibility to avoid incompatible wiring positions or lengths. You can also consult us; we will confirm compatibility for you.

►►The DG47-00068A baking element is installed in the upper part of the electric oven to provide the high-temperature radiant heat required for the baking function. After power is applied, the internal nickel-chromium alloy heating wire generates resistive heating, and the outer shell rapidly heats up and radiates infrared heat downwards, enabling the food to be charred on the surface while remaining juicy inside in a short time. If the oven's "baking" function does not heat or heats unevenly, it is most likely due to a broken circuit or damage to this component, requiring immediate replacement.

►►Electrical Safety: Ensure the power is disconnected during installation. Both circuit breakers must be switched off simultaneously. Use a multimeter to confirm there is no voltage inside the oven before proceeding. Never disassemble components while the oven is energized to avoid electric shock. Troubleshooting: If the heating element is not working, first measure its resistance with a multimeter (it should normally be tens of ohms; otherwise, it may be an open circuit). If an open circuit or severe oxidation and blackening are found, replace the component. Improper wiring of the heating element can also cause malfunction; ensure it matches the original wiring before installation.

►►The DG47-00068A samsung Range Grill Heater Sheath undergoes rigorous inspection before leaving the factory, ensuring superior quality. Providing you with a pleasant shopping experience is our service principle. During this period, if you are not satisfied with the product quality, you can apply for a replacement or refund. Before you make any suggestions, please give us a chance to help you solve the problem; we will give you a satisfactory reply within 12 hours.

Features and Functions The DG47-00068A heating element, used in electric ovens, features the following characteristics: High Heating Efficiency: The internal Ni-Cr heating wire heats up rapidly after being switched on, converting almost all electrical energy into heat energy and quickly generating strong infrared radiation, achieving a heating efficiency close to 100%. Long Lifespan: Made of high-quality nickel-chromium alloy and stainless steel, it is heat-resistant and not easily oxidized, with a theoretical lifespan of tens of thousands of hours. According to the manufacturer, this type of tubular heating element is characterized by "low cost, long lifespan, and high efficiency." Uniform Temperature Distribution: The tubular structure and uniform internal winding design ensure a relatively uniform temperature distribution across the entire element surface, achieving even heating of the upper space of the oven. Corrosion/Oxidation Resistance: The shell material is made of a special heat-resistant alloy, exhibiting good stability after high-temperature oxidation treatment. With long-term use, an oxide film may form on the surface, further improving corrosion resistance. Fast Heating Speed: It heats up to red-hot within seconds of being plugged in, suitable for grilling modes requiring rapid high temperatures. In summary, this heating element is a high-power resistance heating element designed specifically for grilling the upper rack of an oven. It provides a continuous, intense, and concentrated heat source to ensure that the surface of the food quickly browns and caramelizes while the inside remains tender and juicy. Common Faults and Repair Suggestions **Does not turn on/does not heat up:** This may be due to an internal open circuit or poor contact in the heating element. First, disconnect the power and check if the terminals are oxidized or loose. Use an ohmmeter to measure the resistance; if it shows infinite resistance, it needs to be replaced. If the oven wiring harness is loose, re-tighten it. **Continuously heating/constant temperature remains:** This is often a control panel or relay malfunction; the heating element itself may be normal. The controller or thermistor needs to be inspected. **Insufficient heating or uneven heating:** The internal coil may have a partial open circuit or grounding leak. Check the insulation between the heating element casing and the coil; replace it if the insulation is damaged. **External damage:** The heating element must be replaced if it has cracks, bends, or burn-through. Do not attempt partial repairs to avoid safety accidents. Always disconnect the power before inspecting the heating element. If replacement is necessary, purchase compliant, size-matched parts. Keeping the oven clean and avoiding overloading can extend the life of the heating element.