Dash Cam Hardwire Kit OBD2 Charger USB Type C Hardwire Kit with OBD Port Charger Cable for Dash Camera 12-24V to 5V/3A Low Voltage Protection 24h Parking Surveillance/Acc for GPS — Open-Box, 57% Off

OBD Dash Cam Hardwire Kit: This OBD dash cam hard wire power charging cable kit is a wide compatible model for most car dash cameras, GPS, radar, phone and dash cams on the market 24h Parking or ACC Mode Switch: " MODE -": will active your dashcam parking mode for 24h Surveillance and power will cut off if voltage drops below 11.6V; " MODE O": will active ACC mode which only supplier power while engine is on Low Voltage Protection: The OBD dashcam hardwire kit has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it from draining the battery Simple Plug&Go Installation: This OBD dash cam hardwire cable is easy to install by plugging it into your car's OBD connector and making sure it can power on your dashcam, then hide the extra wire; unlike other complex hardwire kits, you need to deal with fusebox and battery electricity Space Saving with Clean Look: Using this dash cam OBD hardwire kit you can easily hide the wire and cable to make your carpet look wire-free and clean; also this dash cam charger doesn't occupy your car's cigarette lighter port and allow you can use the port to charge other devices in your vehicle.

PLEASE NOTE:

1. This car OBD, OBD2 power cable is only working for dash cams which range from 8V-36V, other voltage range is not supported. The voltage will be converted to 5V output.

2. This car charger adapter is suitable for 16-pin OBD and OBD2 ports. It is only used for charging.

 

OBD Dashcam Hardwire Specifications:

ACC mode Input: 12V-24V | Output: 5V/3A

Surveillance mode Input: 12V-24V | Output: 5V/3A

Lengh: 3.5meters(11.5 ft)

Interface: USB Type C

 

 

Hardwire Kit COMPATIBILITY:

1. Please note that this unit does not work with EV Car(Electric Vehicle)

2. The OBD dashcam hardwire charger cable is suitable for most vehicles' OBD ports. (If the OBD hardwire kit does not provide power, please feel free to contact us at any time)

 

 

PRESS BUTTO TO SWITCH 2 MODES:

Mode “O”:

ACC mode: When your car ACC is off, the OBD power cable will also power off after 20 minutes.

Mode “—”:

Surveillance mode: When your car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V(low voltage), it will power off after 20 minutes.

(Because the power of each car changes differently, some errors in the power failure time are normal)

The low voltage protection for mode “—” protects your car from running out of the battery, and enables you to have enough voltage to start the car for the next driving.