DASBET Turbo System Leakage Tester Kit for Cooling Emissions Exhaust Pipes — Open-Box, 6% Off

Easy Troubleshooting: Turbo system leakage tester kit is specially designed to check turbo system leaks or cooling system pipes. It helps you easily troubleshoot turbo leaks and locate the leak location. Simply plug the intake and exhaust with plugs, connect them to the air compressor with a regulator, and pressurize the turbo system. Once pressurized, you can see if the gauge maintains pressure and hear any leaks. Comprehensive Set: The turbocharger turbo boost leak tester kit comes with a 0-6 bar (0-87 psi) gauge to accurately measure the pressure inside the hose. It includes a pressure regulator that locks when pressed down, and a red manual valve to control air pressure on and off. Along with 4 pairs of stepped Adapters (35mm - 90mm), an American air connector, an Asian air connector, and a European air connector, all packed in a storage case. Quick Locate Leaks: Turbo boost pressure leakage tester is designed to accurately detect and locate leaks in the the turbocharger, cooling and emissions systems of most cars and light trucks. Help you charge the turbo system with a low-pressure regulated shop main air source to indicate the presence of leaks within the system. Quickly test the air tightness of your turbocharging system. In addition to being used on turbochargers, it can also be used to cooling systems pipe or exhaust leakage test. Easy Operation: Simply attach the adapters, connect the pressure gauge to your workshop airline, pressurize the system, you can see if the gauge maintains pressure and listening for any indications of a leak. If the pressure drops, the leaks can be easily found by hand or with spray. If the pressure is too high, you can pull the red overpressure relief valve to lower the air pressure. Wide Applications: This turbo boost leak tester set is equipped with 4 pairs of stepped adapters for plugging the intake and exhaust pipes. The multiple sizes allow for fitting several size hoses, which can work on hoses with diameters ranging from 1.38" to 3.54". Detailed dimensions include 1.38''/35mm, 1.57''/40mm, 1.77''/45mm; 1.97''/50mm, 2.17''/55mm, 2.36''/60mm; 2.56''/65mm, 2.76''/70mm, 2.95''/75mm; 3.15''/80mm, 3.35''/85mm, 3.54''/90mm. Note ！Some hoses may require minor adjustment for a perfect fit. Do not force adapters into undersized or rigid hoses. If necessary, slightly enlarge the opening with a smooth file. For hard or reinforced hoses, we recommend applying a thin layer of silicone or oil-resistant grease around the adapter to enhance sealing. Or you can add rubber gaskets or silicone sealing rings to the adapter. Keep the pressure below 30 psi to avoid activating the safety valve！
DASBET Turbo System Leakage Tester Kit

Features:

Utility: Designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system. Helps in identifying leaks within the turbo system and cooling system, improving the efficiency of automotive maintenance.
Cost-Effectiveness: Saves valuable time and money by providing efficient and reliable testing of turbocharger and cooling system leaks.
This cooling system intercoolers radiators hose leaks test offers a comprehensive solution for troubleshooting turbo leaks and identifying issues within automotive systems, making it a valuable tool for automotive enthusiasts and professionals alike.
Helps locate air leaks in turbo system components by plugging the output side of the turbo and the intake inlet. Pressure loss can be located easily by hand or leakage spray.
The adapters are made of premium hard nylon and metal material and can be firmly mounted on different pipes, ensuring good sealing performance.

Warm Tips:

Tip 1: Best to use with an air compressor with a holding tank, not over pressurization, because over pressurization can damage the components of the engine. Pressure gauges with shutoff valves and regulators help prevent overpressure.
Tip 2: The maximum pressure of most vehicle turbocharging systems is approximately 15psi (1bar) to 25psi (1.7bar). Vehicle coolant systems are typically rated for 15psi. (Refer to vehicle manufacturer's data.)
Tip 3: With American air connector, Asian air connector, European air connector (Three specifications of air connectors eliminate your worry that your air compressor connector does not fit the turbo boost leak test kit).