CYCPLUS Bike Speed and Cadence Sensor, Wireless Cycling Speed Sensor Ant+/Bluetooth

SPEED SENSOR & CADENCE SENSOR- Package include: One speed &cadence, you can use the speed and cadence sensor at the same time. BLUETOOTH & ANT+ MULTI-PROTOCOL: Supports all kinds of equipments and applications which collect speed or cadence data via Bluetooth or ANT+ DUAL-MODE SENSOR: Quickly switch between cadence and speed sensor modes by toggling switch to different positions ULTRA SMALL DESIGN & LONG ENDURANCE: SIZE only 𝟑𝟖𝐦𝐦×𝟐𝟗.𝟓𝐦𝐦×𝟗.𝟓𝐦𝐦 & WEIGHT only 𝟗.𝟐𝐠. Not affect bike appearance and increase cycling burden. 𝟑𝟎𝟎 hours using time & 𝟑𝟎𝟎 days standby time. It will enter the SLEEP MODE when not in motion. EASY INSTALLATION: Easily attach to your bike with included ELASTIC and DOUBLE-SIDED TAPE, no magnet or calibration needed. Excelsior quality and innovative design help you ride scientifically and healthily. Mounts to any bike's wheel hub, these sensors are easy to install, maintain and move between bikes. Customer Service:All CYCPLUS products have two years warranty. If you have any problems using the product during this period, you can contact us at any time. Our customer service will contact you for repair and replacement. Note: The Bluetooth of this product can only be applied to the corresponding fitness app, for example, Zwift. can not be directly connected to the cell phone, because of the protocol, the general cell phone does not come with fitness apps.

Specifications:

Brand: CYCPLUS

Color: Black

Material: ABS

Size: 38mm×29.5mm×9.5mm / 1.5"×1.2"×0.4"

Weight: 9.2g / 0.32oz

Measuring range: 0-200 rpm

Battery: CR2032

Rated voltage: 3.0V

Using time: 300 hours

Standby time: 300 days

Waterproof: IP67

Connection mode: Bluetooth 4.0 ; ANT+

Supported objects: Cycling APP, Bike Trainer, Stop watch, Sport Watch etc.

Package Included:

1x Speed Cadence sensor(Battery included)

1x Battery

2x Rubber band

1x Curved rubber mat( For speed sensor)

1x Flat rubber mat( For cadence sensor)

1x User guide

Function instruction:

Function one: Speed measurement

（1）Open the battery back cover. Toggle switch to S position. Install the battery back cover.

（2）Fix the curved rubber mat on the bottom of the product and use a rubber band to fix the sensor on the hub.

（3）Turn the bicycle wheel to wake up the sensor and then connect it to a device or APP.

Function two: Cadence measurement.

（4）Open the battery back cover. Toggle switch to C position. Install the battery back cover.

（5）Fix the flat rubber mat on the bottom of the product and use a rubber band to fix the sensor on the crank.

（6）Turn the crank to wake up the sensor, and then connect it to a device or APP.

Note:

1. Before use, please open the battery cover and remove the transparent insulation spacer.

2. One sensor can’t measure speed and cadence at the same time. If you need to measure them simultaneously, grab 2pcs of sensors.

3. For speed measurement, hub width must be more than 38mm.

4. The product is used for cadence measurement by default.