Customadeonly 5x5.5 Hubcentric Wheel Spacers (2PC 1" 25mm) for Ram 1500 (2012-2018) 1500 Classic (2019-2022) - 77.8mm Hub to 77.8mm Lip - M14x1.5 Studs - Improve Stance & Appearance

[1-Inch Truck Stance Transformation]: Q: How will these spacers affect my truck's look and clearance? A: At 1.0 inch (25mm) thick, these spacers shift your wheels outward to create a wider, more dominant stance. They function to solve tire sidewall rubbing defects against inner suspension struts or custom upper control arms, effectively helping to improve stance & appearance. [True Hubcentric Dual-Lip Setup]: Q: Will I experience steering wheel shake or chassis vibrations at highway speeds? A: No. Built with a 77.8mm vehicle-specific bore and an integrated 77.8mm wheel-centric lip, these spacers function to center the spacer on your truck hub and the wheel on the spacer lip perfectly. This dual-centric interface solves high-speed vibration and balance flaws common with cheap universal configurations. [1-Inch Clear-Fit & Stud Note]: Q: Will I need to modify my factory studs for 25mm spacers? A: If your factory studs are standard length, they will likely extend past the face of these 1-inch (25mm) spacers. To solve this fitment obstacle, your wheels must have empty back pockets between the lug holes, or the factory studs must be trimmed (Stud Mod) to ensure the wheel seats flush and safe. [Forged 6061-T6 Heavy-Duty Strength]: Q: Are these bolt-on units safe for truck towing and daily loads? A: Yes. CNC-machined from structurally dense Forged 6061-T6 Billet Aluminum and equipped with pre-installed Grade 10.9 M14x1.5 studs, these solve structural stress concerns under heavy workloads. The forging process ensures high structural density. [2-Year Warranty & 30-Day Hassle-Free Return]: Q: What protection do I have after my purchase? A: We provide a 2-Year Warranty and a 30-day hassle-free free return policy. This solves the customer's need for absolute peace of mind and total satisfaction when investing in technical wheel hardware for high-capacity pickup trucks.

Precision Stance & Heavy-Duty Stability

Improve the track width and aesthetic of your truck with this pair of 1-inch (25mm) forged wheel spacers. These spacers push your wheels out to be more flush with the fenders, providing a wider footprint that increases lateral stability and allows for larger tire fitment without rubbing.

Integrated Hubcentric Engineering

Designed specifically for the 77.8mm Ram hub, these spacers feature a built-in hub lip that acts as a direct extension of your factory hub. This ensures that your wheel is seated perfectly every time, preventing the wobbles and hardware fatigue associated with non-hubcentric designs.

Forged 6061-T6 Material Science

Built for the extreme torque and weight of full-size pickups, these spacers are forged from high-grade 6061-T6 aluminum for maximum structural integrity. Each unit is equipped with hydraulic-pressed Grade 10.9 studs, ensuring maximum safety and durability during daily driving, towing, or off-road adventures.

Safety & Installation Guide

1. The Protrusion Check: Because these are 25mm thick, your factory studs will stick out past the spacer face. You must ensure your wheels have "pockets" deep enough to accommodate them, or you MUST trim the factory studs.

2. Clean Hub Requirement: Use a wire brush to remove rust or debris from the vehicle hub to ensure a 100% flush, flat mount between the hub and the spacer.

3. No Impact Wrenches: Always use a calibrated torque wrench to tighten lugs to factory specifications in a star pattern. Re-torque all hardware after 25-50 miles of driving.

Technical Specs Summary

- Bolt Pattern: 5x5.5" (5x139.7mm)

- Thickness: 1" (25mm)

- Hub Bore: 77.8mm (With Wheel Lip)

- Thread Pitch: M14x1.5

- Material: Forged 6061-T6 Aluminum