Customadeonly 2Pcs 25mm Forged Hubcentric Wheel Adapters 5x108 to 5x114.3 | 63.4mm Hub to 60.1mm Wheel | M12x1.5 Studs | for Jaguar & Ford 5x108 Hubs to Use 5x114.3 Wheels

【Hubcentric Stability】Specifically engineered to adapt a 63.4mm vehicle hub to a 60.1mm wheel center bore. This hubcentric design ensures the load is perfectly centered on the axle hub rather than the studs alone, eliminating high-speed vibrations and maintaining a factory-smooth ride quality. 【Hubcentric Stability】Specifically engineered to adapt a 63.4mm vehicle hub to a 60.1mm wheel center bore. This hubcentric design ensures the load is perfectly centered on the axle hub rather than the studs alone, eliminating high-speed vibrations and maintaining a factory-smooth ride quality. 【Grade 10.9 M12x1.5 Hardware】Safety is our priority. Each adapter features integrated Class 10.9 Heat-Treated Carbon Steel Studs in the common M12x1.5 thread pitch. These high-tensile fasteners exceed OEM standards, ensuring a secure and reliable connection for your wheel conversion. 【Ultimate Wheel Versatility】This precision adapter allows 5x108 (5x4.25") vehicles—common on many Jaguar and Ford models—to mount the massive selection of 5x114.3 (5x4.5") bolt pattern wheels. Perfect for expanding your wheel options while widening the track by 25mm for a flush, aggressive stance. 【Ultimate Wheel Versatility】This precision adapter allows 5x108 (5x4.25") vehicles—common on many Jaguar and Ford models—to mount the massive selection of 5x114.3 (5x4.5") bolt pattern wheels. Perfect for expanding your wheel options while widening the track by 25mm for a flush, aggressive stance.

Precision Conversion for Jaguar & Ford 5x108 Platforms

Expand your wheel choices with Customadeonly 25mm Forged Wheel Adapters. These adapters are engineered to bridge the gap between your vehicle's 5x108 (5x4.25") bolt pattern and the popular 5x114.3 (5x4.5") wheel pattern, allowing for a seamless fitment of aftermarket wheels.

Forged Strength and Durability

CNC-machined from Forged Aerospace-Grade 6061-T6 Aluminum Alloy, these adapters offer an elite strength-to-weight ratio. The natural silver finish provides superior corrosion resistance, while the Grade 10.9 M12x1.5 Studs are built to handle modern performance demands.

CRITICAL SAFETY: THE STUD TRIMMING RULE

At 25mm (1.0") thick, your factory wheel studs MAY protrude past the surface of the adapter depending on your vehicle's stud length.


Check Wheel Pockets: Your wheels must have internal cavities (back pockets) between the mounting holes to accommodate the protruding factory studs.

The Gap Danger: If your wheels lack these cavities and the factory stud hits the back of the wheel, it creates a gap. This gap transfers all weight to the studs as "shear force," which will snap the studs and lead to wheel loss.

Solution: If a gap exists, you MUST trim or shorten the factory studs to ensure a 100% flush mount. A flat mating surface is mandatory for safety. Hand-test for flushness before final torquing.

Specific Fitment Configuration

Vehicle Side (Hub): 5x108mm Bolt Pattern | 63.4mm Bore

Wheel Side (New Wheel): 5x114.3mm Bolt Pattern | 60.1mm Hubcentric Lip

Hardware: Integrated M12x1.5 Grade 10.9 heat-treated studs.

Thickness: 25mm per side.