Customadeonly 2pc 3/16" (5mm) 5x114.3 Hubcentric Wheel Spacers - 64.1mm Hub to 73.1mm Aftermarket Wheel Bore - Silver - Fits Honda Acura

[64.1MM TO 73.1MM BORE CONVERSION] The ultimate solution for mounting aftermarket wheels on for Honda and for Acura hubs. These 5mm spacers convert your factory 64.1mm hub bore to a 73.1mm wheel-centric lip, ensuring a perfectly centered, vibration-free fitment without separate hub rings. [HIGH-GRADE ALUMINUM BUILD] These spacers are manufactured from high-quality aluminum with a clean silver finish. They provide a lightweight and effective way to achieve a professional flush-to-fender appearance while resisting corrosion on fits Civic and fits Accord models. [AFTERMARKET WHEELS ONLY] Specifically engineered for wheels with a 73.1mm center bore ONLY. These spacers feature an integrated 73.1mm outer lip to center aftermarket wheels; they will NOT fit factory for Honda or for Acura wheels which use a smaller 64.1mm bore. [SAFE THREAD ENGAGEMENT CHECK] These are 5mm "slip-on" style spacers. You MUST verify that you can still achieve at least 6.5 to 8 full turns of the lug nut with the spacer installed. If you have fewer turns, you must install extended wheel studs (not included) for safe operation. [FRESH STANCE & CALIPER CLEARANCE] Give your vehicle a fresher look with more stance. This 3/16-inch offset is the perfect thickness for clearing slightly larger aftermarket brake calipers or fine-tuning wheel fitment to eliminate inner fender rubbing on fits Acura and fits Honda 5-lug platforms.

3/16" (5mm) 5x114.3 Hubcentric Spacers (64.1mm Hub to 73.1mm Aftermarket Wheel Conversion) - Silver

Achieving a vibration-free ride with aftermarket wheels is simple with these precision 5mm conversion spacers. Designed specifically for for Honda and for Acura 5-lug hubs, these spacers act as a permanent hub-bore adapter, seamlessly bridging the gap between your 64.1mm factory hub and common 73.1mm aftermarket wheel bores.

Precision Aftermarket Integration

Avoid the hassle of loose-fitting hubcentric rings. These high-grade aluminum spacers feature a precision 64.1mm inner diameter and a built-in 73.1mm wheel-centric lip. This ensures the wheel is perfectly centered on the hub, protecting your hardware from shear stress and providing a factory-smooth ride at highway speeds for fits Accord, fits Civic, and fits MDX owners.

⚠️ CRITICAL SAFETY CHECK: LUG NUT TURNS

Because these spacers add 5mm of thickness, your factory studs will have less thread available for the lug nuts. For your safety, you must ensure that your lug nuts can complete at least 6.5 to 8 full 360-degree turns before they are tight. If your vehicle has short factory studs, extended wheel studs (not included) may be required.

Safety and Installation Guide

1. 73.1mm Bore Only: Verify your aftermarket wheels have a 73.1mm center bore. This lip will not fit wheels with smaller bores.

2. Clean Mounting Surface: Use a wire brush to remove rust and debris from the hub to ensure the spacer sits 100% flat against the brake rotor.

3. Hand Torque Only: Always use a calibrated torque wrench to tighten lug nuts in a star pattern. Never use impact tools for final installation.

4. Verification: Strictly for 5x114.3 bolt patterns with 64.1mm vehicle hubs.

Technical Specs Summary

- Vehicle Pattern: 5x114.3mm

- Thickness: 3/16" (5mm)

- Quantity: 2 Pieces (1 Pair)

- Chassis Hub Bore: 64.1mm

- Wheel Side Lip: 73.1mm (Aftermarket Fitment ONLY)

- Material: High-Grade Aluminum (Silver)