CNCTOPBAOS 4 Axis USB Mach3 Motion Control Card,Red 4-Axis Linkage MACH3 CNC Controller Board,Stepper Motor Driver Control Card 100KHz 4 Inputs Breakout Board for CNC Router Engraving Machine — Open-Box, 17% Off

Product: 4 Axis USB Mach3 Control Board; Port:USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface; As long as Mach3 can run,the control card can be used; Support computer system:Windows XP/7/8/10 4 Axis Linkage:Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor; One status LED, indicate connection status on the board Output Signal Ports:Have 0-10V signal output,you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device; Support for connecting electronic handwheel; Handwheel interface: 2x5P row needle Input Signal Ports:4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device; Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable Applications:CNC Router,Milling Machine,Engraving Machine,Carving Machines,Cutting industry,Medical equipment,industrial equipment and automation devices etc

Parcel include:

1× Red 4 Axis USB Mach3 control board

1× USB Cable

Descriptions

Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives;

Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;

Have 0-10V signal output,you can use mach3 software to control the spindle motor speed.

One status LED, indicate connection status on the board.

4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.

4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device.

Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.

Support for connecting electronic handwheel;Handwheel interface: 2 * 5P row needle

MCU model: three generation 32-bit STM processor

The output singal of theelectronic handwheel must be 5V, more than 5V output will damage the hand wheel interface.

USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface.

This control board does not require any drivers to be installed,as long as Mach3 can run, the control card can be used;

Support computer system: Windows 2000/ XP / Windows 7/8

The inverter interface (AVI +, AVI-) is isolated from the computer and the main control circuit, and has strong anti-interference ability,no interference signal will be introduced due to the introduction of external strong electrical equipment.

Whether frequency converter is supported: Yes

Support PWM: Yes

Number of control axes: X.Y.Z.A axis

: