CERRXIAN OBD Power Cable for Dash Camera, OBD to Mini USB OBD Adapter Hardwire Charger Cable 24 Hours Surveillance/Acc Mode with Low Voltage Protection 12-24V to 5V 3A (11.5FT) (Right Angle mini USB) — Open-Box, 33% Off

🚗Dash cam obd power cable is suitable for all mini usb port electronic devices.Designed to provide continuous power supply 24 hours after parking for in-car devices like dash cam dvr, mirror recorder,moble phone, tablets etc. 🚗ACC mode switch/24-hour parking: "MODE O":will activate the ACC mode, only in Power supply when engine starts,power off in 10-200 seconds after the engine is turned off, the exact time varies according to the car's factory settings."MODE -": will activate the driving recorder parking mode for 24-hour monitoring.If the voltage is lower than 11.6V, the power will be cut off. 🚗Low voltage protecting obd power adapter mini usb: Built-in intelligent programmable chip that automatically detects the battery voltage and provides low voltage protection. When the battery voltage is lower than 11.6V, it will automatically cut off the power output to ensure the normal start of the vehicle. 🚗Simple plug-in installation: Plug and play without damaging the car circuit. Comes with a Auto Clip Panel Trim Installer to you can easily hide wires and cables 🚗Input:DC 11.6V-24V, Output:DC 5V/3A; Extension cable length: 3.5meter(11.5 ft). Specially designed for dash cam GPS navigator, DVR, radar detector and more mini usb port devices.Note!!!Not compatible with Volkswagen, BYD, Skoda and other cars

Application

CERRXIAN OBD Power Cable for Dash Camera Support 12V or 24V vehicles, like Sedan, Pickup, SUV, Trucks, etc.

Provide power supply for in car phones, tablets, dash camera recorders, portable GPS monitor, reversing camera monitor, etc.

Maximum output current up to 3.0A

Voltage input: DC 12V - 24V

Voltage output: DC 5V

Cable length: Max. 3.5 meters

Output port types: Mini USB

Packing

1x OBD Hardwire Kit for Auto Dashcam recorder

Note:

1. the manual switch is for switching the power modes:

Switch '1': USB Output would be cut off automatically when car battery <11.8V(12V) or <23.6V(24V)

Switch '0': USB Output would be cut off in 200 seconds after car engine is powered off

2. This cable is designed for those dash camera with time lapse video recording, but it also works for dash camera without that feature as well. No worries.