BlueStars 40A 4-Pole Contactor 120VAC Coil — Open-Box, 11% Off

BlueStars AC Contactor for Air Conditioner Compressor Condenser. 4 Poles; Coil Voltage: 120 VAC; Rated current: 40 Amp FLA; Frequency: 50/60 Hz; Operating temperature: -25℃ - 70 ℃ 𝗖𝗢𝗡𝗧𝗥𝗢? 𝗧𝗛𝗘 𝗙𝗟𝗢𝗪 𝗘𝗙𝗙𝗘𝗖𝗧𝗜𝗩𝗘𝗟𝗬: A broken or burned contactor can lead to electrical failure: A condenser unit never shuts off | The AC hums and will not turn on | the AC makes a chattering noise. BlueStars 4 Pole 40 Amp 120V Contactor will replace your bad AC contactor to provide power to the compressor and condenser to turn your AC unit on and off, control the flow of electricity to all parts of your unit and get it to work again. 𝗣𝗥𝗘𝗠𝗜𝗨𝗠 𝗤𝗨𝗔𝗟𝗜𝗧𝗬: BlueStars 4 Pole 40 Amp 120V is made of strong silver alloy which is oxidation resistant and has a high conductivity rating, temperature strength, and corrosion resistance. The high-quality plastic surface helps prevent people from touching the contact directly and may also protect the contact against dust and rainwater. 𝗣𝗘𝗥𝗙𝗘𝗖𝗧 𝗠𝗔𝗧𝗖𝗛: BlueStars 4 Pole 40 Amp 120 V Contactor can replace 3 pole contactors rated at 20A 25A 30A 35A 40A on air conditioners and heat pumps. 100% LIFETIME PROTECTION: Enjoy reliable performance with our lifetime protection, ensuring that your product will always be covered for any defects or issues that may arise.

Description

An AC contactor is widely used in power on and off and circuit control. It will control the electric city's flow to all the unit's parts. If your contactor is broken or burned, the AC unit will lose its ability to cool the home adequately and may run continuously, maybe it is time to change it.

EXACT REPLACEMENT FOR YOUR FAILED CONTACTOR

The AC contactor may need replacement when it develops a fault or goes bad. BlueStars 4 Pole 40 Amp 120V. The contactor will replace your bad AC contactor to provide power to the compressor and condenser to turn your AC unit on and off, control the flow of electricity to all parts of your unit and get it to work again. 

SIMPLE INSTALLATION

Our 4 Pole 30 Amp 120V Contactor is straightforward to attach, load and use. You can follow the 05 following steps:

Shut off the power to the AC. Verify that the power is off with a multimeter. 

Mark the wires and their location on the contactor, then remove them from the contactor. 

Remove the mounting screw then mount the replacement contactor

Reconnect the wires, and ensure that the wire connections are tight

Turn the power back 

*Don’t forget to wear gloves and shut off the power to the AC and the furnace/ air handler.

SPECIFICATIONS

Poles: 4

Coil Voltage: 120VAC

Rated current/ Amperage (FLA): 40A

AC Frequency: 50/ 60 Hz

Operating temperature: -25℃ - 70 ℃

*It is alright to replace a unit with one having a higher rating but not the one with a lower rating