Black Suede Headliner Fabric 96" L x 60" W with 3.5mm Foam Backing Material — Open-Box, 5% Off

SOFT SUEDE WITH 3.5MM FOAM BACKING: Refresh a worn, sagging or peeling vehicle ceiling with soft black synthetic suede. This black suede headliner fabric is bonded to a 3.5mm foam layer, helping create a smooth, cushioned interior finish for headliner replacement and restoration projects. 96" x 60" DIY COVERAGE: This automotive headliner fabric sheet provides approximately 40 sq. ft. of material for many cars and selected truck, SUV and RV interior projects. Vehicle roof dimensions vary, especially around sunroofs and overhead consoles, so measure the removed headliner board and allow extra material around every edge before ordering. EASY TO CUT AND SHAPE: This flexible foam-backed auto headliner fabric material can be trimmed with sharp scissors or a utility knife and shaped around curves, corners and openings. Remove all deteriorated foam and adhesive residue, clean the headliner board thoroughly, and dry-fit the fabric before applying adhesive. FOR MORE THAN VEHICLE ROOFS: Suitable for automotive headliners, door-panel inserts, side panels, speaker boxes, RV ceiling panels, boat-cabin interiors and other indoor upholstery projects. This material is intended for interior applications and is not designed as an exterior waterproof marine fabric. FOLDED SHIPPING AND INSTALLATION NOTES: The fabric is folded for compact shipping. After unpacking, lay it flat and use gentle steam from the fabric side if needed to relax fold marks; avoid pressing or overheating the foam. Headliner adhesive and installation tools are not included.

Restore a worn or sagging vehicle interior with soft black suede headliner fabric backed by 3.5mm foam. The cushioned construction is designed for automotive roof-liner replacement and a wide range of interior upholstery projects.

96" x 60" Coverage
The material covers approximately 40 square feet. It is suitable for many passenger-car headliner projects as well as selected truck, SUV, RV and boat-cabin interior applications. Because headliner-board shapes vary, measure the board at its longest and widest points and leave additional material around the edges for wrapping and trimming.

Flexible DIY Material
The foam-backed fabric can be cut with sharp scissors or a utility knife and shaped around roof contours, dome lights, handles, visors and other openings. It may also be used for door-panel inserts, side panels, speaker boxes and other indoor trim projects.

Preparation Matters
For reliable installation, remove the old fabric and deteriorated foam completely. Clean the mounting surface, dry-fit the new material and use a high-temperature adhesive specifically intended for foam-backed automotive headliners. Adhesive and tools are not included.

About Fold Marks
This fabric is folded for compact shipping. Unpack it before installation and lay it flat. If fold marks remain, apply gentle steam from the suede side while keeping the steamer moving. Do not place a hot iron directly on the fabric or compress the foam backing.

Package Includes
1 black suede headliner fabric sheet measuring 96" L x 60" W with 3.5mm foam backing.