Art3dwallpanels 20 Pack 3D Wall Panels for Interior Wall Decor, 12''x12'' White Accent Diamond Panels for Gaming Room Bedroom TV Background, White — Open-Box, 13% Off

Real 3D Design: Diamond pattern with raise design makes our wall panels more eye-catching. A box comes in 20 tiles.

Be Your Own Designer: Easy to DIY, no specialized knowledge is required. Plan the 3D accent wall panels by yourself. Replace the boring wall, get a fresh look for your room.

Premium Material: This textured wall panel is made of premium PVC, thin and light which is easy to install. Waterproof, fire-resistant features which make this panel more sturdy and durable.

Wide Application: Add new wall decor to your home! Perfect choice for living room, bedroom, game room,bathroom, feature wall, ceiling, mancave. Any kinds of interior decoration in both residential and commercial.

A Trusted Brand: Every customer is in good hands, we deliver a good quality item to our customers, please let us know if there are any defects or damage of products.

3D WALL PANEL INSTALLATION MANUAL 1.PREPARATION FOR THE WALL All the basic wall must be flat, dry, clean and firm. If the wall is Aged , the surface must be painted with water-based seal primer to fix the loosen surface firstly. 2.PREPARATION FOR THE WALL PANEL Open the box and take out the panels very carefully. Put the panels on the clear and dry floor for 24 hours to balance the moisture between panels and environment, to prevent excessive expansion or contraction after installation. 3.MEASURE THE WALL Measure the size of wall to find out the central point of it, then mark vertically and horizontally. Arrange it on the floor by rotating the panels before attempting to install, ensuring correct installation of the desired pattern. 4.INSTALL THE COMMODITIY ON THE WALL Put the heavy duty construction adhesive to the lower parts of panel back, to put the adhesive higher than the panel back. Apply the panels on the wall same as planned design, pressing the panels’ edges to ensure all the panels adjoin the wall tightly, Clean the glue which is flow out of the panels. It will be better to set aside it two hours for drying, then move to the next step. 5.CUTTING THE PANELS If meet the corner or electric outlet of wall part, we can draw line one the panel then use a knife or electric saw to cut panels freely according to the line to fit the wall situation 6.CUT EDGES TRIMMING AND PAINTING If the cut edges of panels meet the corner or end of the wall, fill the cut edges with sheet rock compound/acrylic caulking. If additional finish is needed, paint the panels with oil base lacquer.