AltitudeCraft Cartridge Removal Tool Compatible with Moen 1222, 1225, 1200 — Open-Box, 6% Off

PULLS OUT STUBBORN MOEN CARTRIDGES: Precision-engineered to safely extract heavily calcified Moen 1222, 1225, and 1200 Posi-Temp & Moentrol replacement cartridges that have been seized for years. WARNING: This tool is NOT compatible with plastic 1224 two-handle valves. Please verify your shower valve model before ordering to ensure an exact fit. KEEP YOUR 250 AND FIRE THE PLUMBER: Stop paying 150 to 350 for a weekend plumber callout. This exact-fit AltitudeCraft shower cartridge removal tool empowers any homeowner to turn a frustrating, hours-long plumbing nightmare into a safe, 5-minute DIY fix. Save your money and don't tear open your walls, do it yourself. UPGRADED GRADE 8 BOLT WON'T SNAP: We know cheap "pot metal" tools twist in half on the first use. We fixed it. The AltitudeCraft cartridge puller is upgraded with a heavy-duty, 5.12" extra-long Grade 8 steel bolt that instantly reaches deep threads. Engineered to deliver a rock-solid bite with zero snapping, bending, or stripping. PURE ROTATIONAL T-HANDLE LEVERAGE: Put the Vise-Grips away. Yanking a stuck cartridge with pliers will snap the stem. Our solid alloy T-handle delivers balanced, two-handed torque to safely break decades of hard water and calcium seals. Laser-engraved "TWIST" arrows mean zero guesswork. Allen wrench included right in the box. CONTRACTOR-GRADE TOUGHNESS: Built for the 20-year veteran plumber and the weekend DIYer facing hard water sediment. Arrives ready to work in premium packaging so the threads are never damaged in transit. Backed by a 1-year standard warranty (extendable to 3 years).

That Moen 1222 cartridge has been seized in the valve body since the Bush years and the drip is back. The next plumber call averages 275 dollars. AltitudeCraft makes a cartridge removal tool that pulls the seized cartridge out in about 20 minutes - same job, your Saturday intact.

Compatibility

Moen 1222 (Posi-Temp single-handle)

Moen 1225 (Moentrol single-handle)

Moen 1200 (older single-handle)

Not for the plastic Moen 1224 (pulled by hand, not by a puller)

Not for two-handle Moen valves

Check the model stamped on your cartridge before ordering

What's in the Box

Cartridge puller body

SUS 304 stainless steel drive screw pre-installed for corrosion resistance in damp valve compartments

Allen wrench sized to the drive screw, in the box

How to Use

Step 1: Turn off the water, remove the faucet handle and trim plate

Step 2: Remove the retainer clip from the valve body (mind the clip, it likes to drop into the wall)

Step 3: Place the puller over the cartridge so the tool tabs sit between the cartridge ears

Step 4: Thread and tighten the drive screw into the brass valve stem with the Allen wrench

Step 5: Turn the T-handle in the direction of the TWIST arrow until the cartridge is almost fully out, then pull straight

Step 6: Flush the valve body before installing the new cartridge

If the valve stem rotates with the tool instead of moving out, re-seat the tool tabs deeper into the cartridge ears

Warranty

Backed by a one-year AltitudeCraft warranty against manufacturing defects, plus three free years through product registration. If anything goes wrong, call AltitudeCraft.