Akylin Shaker Rail and Stile Router Bits,2PCS Router Bit Set 1/4 Inch Shank,Combination Bevel Profile Scriber,for Cabinet Panelled Door and Drawer Fronts Making,Profile Scribing Tooling

🔨2Pcs Shaker Rail and Stile Router Bit,1/4" shank,cutting diameter 1-5/8",cutting depth 3/8". Bit A# cutting height 7/8",bit B# cutting height 5/8". Ideal for use with 1/2" to 7/8" timber. 2 size bits a pack. Application: Creating frames for frame-and-panel doors 🔨Route the ends of rails with one bit, then change to the second bit,to route the inside edge profile in all door parts. Finally,center panel can be inserted and the door could be assembled 🔨Bits are perfect for using in a table router.1/4" shanks should only be used with a medium or heavy duty router.MAX RPM 18 000 🔨Very high grade tungsten carbide-YG6X carbide tipped,with minimal wear and longer life.Silver induction brazing for maximum strength and durability.Heat resistant coating will provide the router bits with superior wear resistance and Rust and corrosion prevention 🔨1/4" shank made by solid steel,heat treated,lower vibration for the bigger cutter and added stability.Cutters with guided bearing reduce setting up time for curved workpieces. Ensures perfect guidance and smooth running,reduce trimming mishaps,largely reduces chipping 🔨Notes: This tools cannot be re-sharpened.Shaker rail and stile bits only work properly on solid wood. MDF and plywood are not recommended

NOTE: 

1.A little rust preventive oil deposits on the sandblasted surface (looks a little dirty),is normal and doesn't affect the usage. Absolutely guaranteed to be a good quality new bits!

2.Insert the cutter shanks into the collets as deep as possible,leave 3mm or less shank showing. 

3.Before the product is received for using, check the drill bit for cracks or chips,we provide perfect after-sales service.

4.Trial cuts should be made on waste material before starting any project.

SAFETY INSTRUCTIONS:

1.Always wear dust protection mask,eye protection in the form of goggles, safety spectacles or a visor.

2.Make sure use on a router machine for which the product is applicable.

3.Please make sure that the Router Bits and router table connections is tight and avoid loosening and causing it to throw out !!!

4. Suitable for all woodworking projects for both professionals and hobbyists.

5.Always return the cutter to its packaging after use.

6.Before each use check that the cutting tool is sharp and free from damage. 

ROUTING SAFETY

1.Ensure the cutter can be used safely with the chosen router before use. Check that the cutter is fitted securely in the router collet.

2.Do not take heavy and deep cuts in one pass as this will overload the router. 

63.When stated, the speed range should be adhered to. Recommended speeds are shown in shop products descriptions.