AizzKry Low Voltage Wire Connectors Landscape Light Connectors 12-18 Gauge UL Listed Low Voltage Cable Connector for Landscape Lighting/Pathway Light/Spotlight, Pack of 16 -Covering 16 Lights — Open-Box, 44% Off

【COVERING 16 LIGHTS】Not as other connector which TWO PIECES PER CONNECTION,each of our low voltage connector per connection. Other connector 16pack is equal to 8 pairs, just covering 8 lights, our 16 pack is equal to 16 pairs, COVERING 16 LIGHTS. New Design but still work well ! 【SUPER EASY TO INSTALL】NO Splicing/Crimping or tools required! First, please strip down the light wire insulation 1/2inch, insert and lock in your conductors from the landscape lights. Second, squarely place and compress the wire connector around each side of your low voltage feed wire. Last, lock the connector. Quickly and easily install low voltage wire to your lighting fixture in 2 minutes or less! 【MORE COMPATIBLE】Perfect match for 12 /14 /16/18 gauge wire of low voltage landscape lighting. Wide used for garden, pathway, walkway, driveway, yard, patio, lawn, walls, trees, flags etc 【RELIABLE SAFETY AND QUALITY】As UL-listed landscape lighting low voltage wire connectors,every single wire connector is well made and secure fit with a great connection, will be fine choice for your long term use of outdoor lighting fixtures. 【SOLUTION FOR THINNER CABLE 】The low voltage connector is designed for SPT-1 or SPT-2 light wire, if your light wire is thinner than that type, please stripping and folding the cable over then fasten clamp, also check all connections with slight pressure with pliers, it will start to work normally.

Are you Looking for a landscape connector that just simply works without having to dig and replace faulty wire connectors every single year?

Please Try out our Fastlock landscape wire connectors and quickly fix faulty connections.

Why choose us?
✅COVERING 16 LIGHTS--Each of our low voltage connector per connection--NOT AS OTHER CONNECTOR which two pieces per connection, other 16 pack is equal to 8 pairs, just covering 8 lights. Our 16 pack is equal to 16 pairs, covering 16 lights
✅EASY TO INSTALL - NO Splicing/Crimping or tools required! Finish it in 3 minutes or less!
✅Replace old faulty connectors found on outside wall mounts, edge, walkway, garden, fences, downlight
✅RELIABLE SAFETY AND QUALITY - As UL-listed landscape lighting low voltage wire connectors,every single wire connector is high quality！！

Warm Tips for Installation:
1.These connector is used with landscape lighting systems only. IF THE INSULATION OF THE WIRE IS TOO HARD PLEASE HEAT AND SOFTEN IT FIRST.
2.Insert and lock in your conductors from the landscape lights and squarely place and compress the wire connector around each side of your low voltage feed wire until the connector locks.
3.Be sure both of the needles are piercied into the power chord before you lock it. Pay more attention the first time you use it.
4.Keep the connectors away from water, or dry it soon once it get into water.

Important Parameters:
Lighting Cord: SPT-1W/SPT-2W, 18/20AWG
Low Voltage Power Cord: 12/14/16/18 AWG

NOTE:
PLEASE TURN OFF THE POWER BEFORE INSTALLATION
PLEASE TURN OFF THE POWER BEFORE INSTALLATION
PLEASE STRIP DOWN THE LIGHT WIRE INSULATION 1/2INCH

Light up your garden,shrubs, as up lights on trees or to light up fish pond. Enjoy your beautiful night~