AITKEN Master Power Window Switch Driver Side Compatible with 2003-2007 Honda Accord DX LX SE Sedan 4-Door 2.4L 3.0L, Odyssey 2003-2007 P/N 35750-SDA-HO7.

Compatibility: Compatible with 2003, 2004, 2005, 2006, and 2007 Honda Accord DX LX SE Sedan 4-Door 2.4L 3.0L. OE number: 35750-SDA-HO7, 35750-SDA-H02, 35750-SDA-A12. Plug & Play Installation: Vehicle-specific connectors enable direct replacement without computer programming (The remote control key needs to be re-matched, please check the description page for matching steps), restoring all factory functions including anti-pinch protection and window controls identical to OEM operation. Reliable Durability：Crafted with high - quality materials, it guarantees long - lasting performance, withstanding the test of frequent use. Worry-free after-sales service: provide 1 year quality after-sales, encounter any quality problems of the product can contact us, we will solve for you!

Brand: AITKEN

Part Description: Combination switch for windows locks, windows lift, doors locks

Position: Front Driver Side

Condition: New

Fitment Type: Direct Replacement

OEM / Interchange Number:

•  35750-SDA-HO7
• 35750-SDA-H02
• 35750-SDA-A12
  
• ‎35750SHJ306
• 35750SHJA21
• 35750SHJA22
• 35750SHJA23
• 35750SHJA24
• 35750SHJA25
• 901-650
  

Compatible vehicle models:

• 2003-2007 Honda Accord DX LX SE Sedan 4-Door 2.4L 3.0L
  

Note: After replacing the main driver's window switch on this model (from any source, including aftermarket and used wrecking parts), you will need to re-match the remote key as follows:

1. Activate Window Auto-Function

• Install the New Switch
  ➤ Insert the new window switch into the slot (do not fully secure it yet).
• Power On
  ➤ Insert the key into the ignition and turn it to the "ON" position.
• Calibrate Auto-Up/Down
  ➤ Pull and hold the driver’s window button upward until the window fully closes.
  ➤ Continue holding the button for 3-5 seconds after closure.
• Test Auto Function
  ➤ Briefly press the button to verify one-touch automatic window operation.

2. Program Remote Lock Function

• Reset Key Signal
  ➤ Remove the key, then reinsert it into the ignition.
• Enter Programming Mode
  ➤ Turn the key to "ON" → Immediately press the LOCK button on the key fob → Turn the key back to "OFF".
• Repeat Programming Cycle
  ➤ Rapidly complete the above sequence (ON → LOCK → OFF) five times within 10 seconds.

3. Final Verification & Installation

• Full Function Test
  ➤ Confirm both auto window operation and remote locking work properly.
• Secure the Switch
  ➤ Only after successful verification, fully install and secure the window switch.

Critical Notes
◆ Ensure continuous operation during programming (no pauses between cycles).
◆ If functions fail, repeat corresponding steps.

Product Buying Advice:

We recommend using the OE number to match the part to ensure full compatibility with your vehicle.Additionally, carefully compare the product images to avoid purchasing errors that may cause unnecessary trouble.

Our products are manufactured to the original manufacturer's specifications and can be directly replaced for improved performance and stability for your vehicle.

If you have any questions or need assistance, please feel free to contact us. We are here to help.