5x120 to 5x114.3 Wheel Adapters Fits Chevy 5/8" (15mm) M12x1.5 4PCS — Open-Box, 52% Off

[HUB-SIDE VEHICLE FITMENT] Fits Chevrolet Camaro 2010-2024 and Corvette C8 2020-2026; Cadillac CTS/CTS-V 2008-2019, CT5/CT5-V 2020-2026 and CT6 2016-2020 equipped with a 5x120 hub pattern and 66.9mm hub bore. These applications refer only to the vehicle/hub side; verify exact year, trim, wheel specifications and clearance through Amazon fitment before purchase. [HUBCENTRIC 5x120 TO 5x114.3 CONVERSION] Converts a 5x120 vehicle hub to accept 5x114.3 wheels; direction cannot be reversed. The 66.9mm vehicle-side bore and 56.1mm wheel-side hub lip help center the adapter and wheel for consistent alignment. Each adapter is 5/8" (15mm) thick with M12x1.5 Metric Class 10.9 studs. Package includes 4 adapters and supplied low-profile lug nuts. [4-AXIS CNC PRECISION] Four-axis CNC machining supports consistent bolt-hole placement, uniform 15mm thickness and flat mounting surfaces. This helps each adapter seat evenly against a properly cleaned vehicle hub. The matched bore and wheel-side hub lip support consistent centering and help reduce vibration caused by off-center installation. [SGS TESTED MATERIALS] Forged 6061-T6 aluminum combines strength, low weight and consistent material structure for dependable load support. The anodized finish helps resist oxidation, corrosion and surface wear, while carbon steel Metric Class 10.9 studs provide durable fastening strength. Aluminum and stud materials are SGS Tested. [CHECK LUG NUT AND STUD CLEARANCE] Use the supplied low-profile lug nuts, or make sure the wheels have deep enough back pockets to clear the lug nuts and protruding factory studs. Confirm each wheel sits fully flush against the adapter with no contact or gap before driving. Factory studs may require trimming. Torque to vehicle specifications and recheck after 25-50 miles.

5x120 to 5x114.3 Hubcentric Conversion
These 15mm forged wheel adapters mount to select Chevrolet vehicle hubs using a 5x120 bolt pattern and 66.9mm hub bore, then accept 5x114.3 wheels with a 56.1mm center bore. The conversion direction cannot be reversed. Verify the exact year, model and wheel specifications through Amazon fitment before purchase.

Precision Centering and Durable Materials
The matched 66.9mm vehicle-side bore and 56.1mm wheel-side hub lip help center the adapter and wheel for consistent alignment. Four-axis CNC machining supports consistent bolt-hole placement, uniform thickness and flat mounting surfaces. Forged 6061-T6 aluminum combines strength, low weight and consistent material structure for dependable load support. The anodized finish helps resist oxidation, corrosion and surface wear. M12x1.5 Metric Class 10.9 carbon-steel studs provide durable fastening strength. Aluminum and stud materials are SGS Tested.

Package and Installation
Package includes 4 adapters and supplied low-profile lug nuts. Use the supplied low-profile lug nuts, or make sure the wheels have deep enough back pockets to clear the lug nuts and protruding factory studs. Factory studs may require trimming. Clean the hub and test-fit each wheel. The wheel must sit fully flush against the adapter with no lug-nut or stud contact and no gap. Correct any interference before driving, torque all hardware to the vehicle manufacturer's specifications and recheck after 25-50 miles.