4 Axis Nema23 Stepper Motor Driver USB Mach3 CNC Router Controller Kit 36V — Open-Box, 12% Off

23HS2430B Nema23 Stepper Motor: Phase: 2 Phase; Type: Hybrid; Step Angle: 1.8degree; Current: 3.0A; Holding torque: 425oz-in 280Ncm; Shaft: Dual Shaft; Shat diameter: 8mm; 4 Lead Wires; Wirings: A+ to Red / A- to Green / B+ to Yellow / B- to Blue Motor Size: 57x57x112mm DM556S Stepper Motor Driver: Current: 1.0A-6.0A ; Driver microstep: 200-51200 subdivision,adopts 32-bit DSP digital processing technology ; Input Voltage: 20-50V DC 4 Axis USB Mach3 Control Board: USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface. This control board does not require any drivers to be installed; As long as Mach3 can run, the control card can be used; Support computer system:Windows 2000/ XP / Windows 7/8/10 400W 36V 9.7A DC switching power supply; Output Voltage:36V ; Input: 110-120V AC or 220-240V AC; 75W 24V DC Switching power supply Input voltage: 100-240V AC; Output voltage: 24V; This 24V power supply is used to power the 4 axis usb mach3 control card Feature of Driver: Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise

Package include:

4 x 23HS2430B Nema23 stepper motor (Dual Shaft) 112mm,425oz-in,3A

4 x DM556S stepper motor driver DC24-50V,4.5A,256 high microstep

1 x 400W 36V DC 11A switching power supply

1 x 75W 24V DC switching power supply

1 x 4 Axis Red USB Port Mach3 Motion Control Board

1 x USB cable

1 x CD disk

23HS2430B Nema23 Stepper Motor

Moor Type: Hybrid

Step Angle: 1.8 degree

Holding Torque: 425oz.in/2.8Nm

Rated Current/phase: 3A

Frame Size: 57 x 57 x 112 mm

Body Length: 112mm

Number of Leads: 4

Weight: 1.66kg

Front shaft 8mm dia and 21mm length,back shaft 8mm dia and 11mm length

DM556S Driver

Input Voltage: 20-50V DC ( It is recommended to use 24V DC ),Output Peak Current: 1.0A-6A;

Dial Switches

SW1-SW3: Set The Operating Current (1.0A-6.0A)

SW4 is a Half-Current function,when SW4=off,for half-current setttings,when SW4=on,current static state for full-current lock axis

SW5-SW8: Set the speed of subdivision and spontaneous pulses

4 Axis USB Mach3 board

Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives;

Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;

Have 0-10V signal output,you can use mach3 software to control the spindle motor speed.

4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.

4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device.

400W 36V DC Switching Power Supply

Output Current:11A

Output Voltage:36V

Output Power: 400W