23300-62030 Fuel Filter Kit Replaces 2330062030 — Open-Box, 19% Off

【Fitment Confirmation】Fits 1996-2002 Toyota 4Runner 3.4L V6 (5VZ-FE engine ONLY). Does NOT fit 2.7L 4-cylinder (3RZ-FE) or 2003+ 4Runner. Confirmed for Base (1996-2001) SR5 (1996-2002) Limited (1996-2001). Replaces OEM 23300-62030. 【Symptom Relief】Hesitation when accelerating? Bogs down uphill? Hard cold starts? Rough idle or stalling at lights? CEL throwing P0171/P0174 lean codes? These are classic clogged fuel filter symptoms on 5VZ-FE engines. Replace now to restore power. 【OEM-Grade Quality】Built to 23300-62030 specs with high-density cellulose + synthetic media. Rated to 75 PSI (safe for 5VZ-FE 44-55 PSI system). Steel housing resists corrosion. Includes 4 aluminum sealing gaskets. 【Complete Kit + Install Warnings】Includes: 1x Fuel Filter + 1x Mounting Bracket + 4x Aluminum Gaskets. WARNING: Depressurize fuel system before install (pull fuel pump relay). Bracket angle may need adjustment. Use new gaskets ONLY. Torque banjo bolts to 22 ft-lbs. 【Complete Fuel Service Bundle】Pair this filter with 23280-62030 fuel pressure regulator for complete fuel system refresh. "

Is your 1996-2002 Toyota 4Runner 3.4L V6 hesitating when accelerating bogging down uphill or stalling at stop lights?

These are classic symptoms of a clogged fuel filter on the 5VZ-FE engine. Owners report ""sputters at highway speed hard to start (especially cold) rough idle and Check Engine Light with P0171/P0174 lean codes."" Don't wait—a restricted filter stresses your fuel pump and risks leaving you stranded.

Restore your 4Runner's performance with this complete 23300-62030 fuel filter kit.

This isn't just a filter—it's a complete service kit including the mounting bracket and 4 aluminum sealing gaskets. Built to Toyota's original 23300-62030 specifications with high-density cellulose + synthetic filter media rated to 75 PSI for safety margin on your 44-55 PSI 5VZ-FE system.

Fitment YOU can verify:

• Engine: 3.4L V6 ONLY (5VZ-FE code). Does NOT fit 2.7L 4-cylinder (3RZ-FE).
• Years: 1996-2002 Toyota 4Runner (3rd gen). Does NOT fit 2003+ (4th gen).
• Trims: Base (1996-2001) SR5 (1996-2002) Limited (1996-2001).
• OEM Cross: Replaces 23300-62030 2330062030.

Complete Kit Includes:

• 1x Fuel Filter (23300-62030 spec)
• 1x Mounting Bracket
• 4x Aluminum Sealing Gaskets (banjo bolt crush washers)

CRITICAL Install Warnings:

• WARNING 1: Depressurize fuel system BEFORE disconnecting lines. Pull fuel pump relay start engine let stall (clears pressure). Skip this = face full of gasoline.
• WARNING 2: Bracket angle pre-set at factory MAY conflict with firewall. Mock-fit first. Adjust bracket angle if needed (10-15 min extra).
• WARNING 3: USE NEW GASKETS ONLY. Reusing old gaskets = #1 cause of post-install fuel seepage. Throw old gaskets away.
• WARNING 4: Torque banjo bolts to 22 ft-lbs. Overtightening cracks fitting. Undertightening weeps fuel.

Complete Fuel System Service Bundle:

Smart owners replace these together:

• Fuel Pressure Regulator (23280-62030): Same symptoms same service window.
• Ignition Coils + Spark Plugs: Full tune-up while you're in there.
• Banjo Bolt Crush Washers: MUST replace every time lines disconnected (sold separately).

Aftermarket vs OEM—Why this filter is the smart choice:

The 5VZ-FE is port-injected (44-55 PSI) not direct injection (2000+ PSI)—filter media quality matters more than brand casting. Save $28 and get the same result.

Warranty Note: Use of this aftermarket fuel filter does NOT void your Toyota powertrain warranty under the Magnuson-Moss Warranty Act. You have rights as a consumer.

Order with confidence. If you have ANY fitment questions message us before ordering. We know 4Runners—we'll help you verify before you buy. Add to cart now and get your truck running right again.

"