2000g Electric Grain Grinder Spice Grain Mill Stainless Steel 30s 28000RPM High Speedy Grinding with Overload Protection& 5min Timer Mill for Dry Spice Herbs/Nut/Coffee/Rice — Open-Box, 10% Off

👍SUPERFINE POWER & HIGH SPEED GRINDER - Power: 3000W; Speed: 28000r/min; Fineness:50-300 mesh; Crush Level: Superfine Crush. Corn grinder made of food-grade stainless steel, sturdy and durable, tough and durable.Mills electric grain equipped with 304 stainless steel three-layer blades with 28000rpm super high grinding speed, and the fineness can reach to 50-300 mesh, make the powder more delicate and increase your work efficiency. 👍SAFETY LID DESIGN & OVERLOAD PROTECTION - The electric grain mill grinder herb equipment will automatically turn off the power when overloaded, to protect your safety, gently press red button reset, you can continue to use it normally.Recommend use time is no more than 3 minutes. Do not continuously operate the machine, and it takes 5-10 minutes to rest after every 3 minutes of grinding work. 👍MULTIPURPOSE GRINDER MILL - Applicable to pulverizing all kinds of dried materials, including grains, soy, corn, barley, rice, wheat, mung beans, coffee beans), spices (star anise, fennel, pepper, rosemary) ,herbs ,sesame, peanuts, walnuts. Please make sure the materials you gonna to grind cover the long blade and no more than 2/3 of the jar to leave the space for blade's turning when grinding. 👍180°SWING TYPE：Swing type is more convenient than stand type.convenient to swing the machine body when it is working, which can make powder more uniform and fine. You could swing the machine body to pour the powder out instead of pick up the whole grinder. Spice grinder electric can set the time, 0~5min, it will stop automatically, save your time and effort. 👍SCOPE OF USE : Grain grinder electric is widely used in families，kitchens,restaurants,clinic,hospital,pharmacy, institute laboratories,medicine processing factory,food store and powder processing,instead of traditional grinders.If there is anything we can help with,warmly welcome to contact us. 👍CLEANING AND STORAGE：1. After each grinding, use a moist paper towel or cloth to clean up the food powder, not directly rinse with water,which will damage the motor；2. After cleaning, please put it in a ventilated place, so that the inner compartment to keep dry, do not put in the sun,check the dry and then cover the lid and store ❗ ❗ ❗ Tips : Due to brush motor,if they both spark and light up in the motor area and fumes arise is normal, which will disappear after you use the machine some times later. when the first several uses there may be a smell，you can Grind some Rice or Dried Tea first for several times to eliminate the odor. ❗ ❗ ❗ USE TIPS: 1. This grain grinder can only be turned on after the lid is fully buckled.2. The materials ready for grinding must be dry enough. 3. Rest the machine for 5-10 minutes after every 3 minutes operation. 4. Do not put the material over 2/3 of grinding bin. 5.Don't clean the grinding tank with the water directly. Keep water away the grinding tank and use dried rag or brush to clean the machine. ❗ ❗ ❗ USE SAFE : Our machine has UL certification,FCC certification, CE certification, The machine has overload protection and will automatically disconnect the power,please feel free to use,for more considerations and questions, please refer to the instruction manual. ❗ ❗ ❗ PLEASE MESSAGE US：If you are in any way dissatisfied with your transaction with us before giving féẹd-báck. We endeavor to make our customers happy, and would appreciate the opportunity to rectify any issues that may occur. LEJIEYIN- Determined to Make High Quality Grinder
Operations Guide:
Turn off the power switch before using the device.
1. Open the top cover. (Tighten clockwise, open counterclockwise).
2. Put the dry material into the shredding container. (Best amount of material for 2/3rds,The smashing material should keep dry, Not suitable for wet, fresh, oily or sticky materials.)
3. Close the top cover tightly,completely tighten the two bolts on the lid.
4. Plug in and turn on the switch for grinding (Do not continuously operate the machine, and it takes 5- 10 minutes to rest after every 5 minutes of grinding work.)
5. Turn off the switch, (When you hear the sound rolling evenly, the material has been grinded into powder)

Special Attention:
To avoid sparks and smoke caused by overloading the machine during operation:
1. Recommended that the grinding material should not exceed two-thirds of the container,never fill the container.
2. Recommended that the working time should not exceed 5 minutes.
About sparks and smoke, it is a normal phenomenon,Due to brush motor, some sparks and brush frictional odor is normal when the first several uses, Please don't worry and cut off the power. Check whether the carbon brushes are loosing ans Please Tighten the carbon brushes on both sides or Reducing the amount of grinding powder then try to start the grinder.The machine has overload protection and will automatically disconnect the power.please feel free to use.

Tips:
When the machine is received, there may be a smell, which is normal;
For the first time, it is recommended to wipe the inside of the container with a dry paper towel and first put in rice or tea leaves for grinding to eliminate the smell.