2 Inch Ball Hitch Mount Kit with Trailer Ball, Pin and Cover, Fits 2 Inch Receiver, 7500 lbs, 4 Inch Drop and 2 Inch Rise - Better Boat

COMPLETE TOWING STARTER KIT: Includes a 2 inch chrome trailer ball with 1 inch shank, 5/8 inch hitch pin and clip, and a protective ball cover. Everything needed to tow is in the box. No separate hardware runs required.

MARINE GRADE RUST PROTECTION: Carbon steel with electro galvanized coating and powder coat finish. Resists salt spray, rain, and road grime that corrode standard hitches. Built for boat trailers and year round coastal towing.

FITS 2 INCH RECEIVER, DROP OR RISE: Slides into any standard 2 inch receiver opening on trucks and SUVs. Flip the mount to switch between drop and rise depending on vehicle and trailer height. Compatible with standard 2 inch trailer couplers.

PRE TORQUED AND READY TO INSTALL: The chrome ball arrives torqued to spec. No tools needed to get on the road. Carbon steel shank resists bending under repeated towing loads. Exceeds SAE Class III standards with 7500 lb towing capacity.

COMPLETE KIT VS BARE MOUNTS: Most competing hitches include only the mount. This kit comes with the chrome ball, hitch pin, clip, and cover, assembled and torqued. Better Boat is a family owned American company based in Miami Beach, Florida.

The trailer is loaded. The coupler is hooked. Then the tow vehicle sits too high, the tongue drops at an angle, and the whole haul is off. Arriving at the ramp with the wrong drop size, or a bare mount still missing the ball and pin, turns a straightforward hitch job into a parts store run. This ball hitch mount kit includes everything needed to connect a 2 inch coupler trailer to any standard 2 inch receiver. Inside the box: a 2 inch chrome trailer ball with 1 inch shank, a 5/8 inch hitch pin and clip, and a rubber ball cover that protects the chrome when not in use. The ball arrives pre torqued to specification. No torque wrench needed. The mount is carbon steel with two layers of finish: an electro galvanized base coat followed by a powder coat outer layer. This combination protects against the salt, moisture, and road grime that corrode bare steel and standard chrome hitches from the inside out. Built for the demands of boat trailer towing and coastal environments where a single season of salt exposure destroys unprotected hardware. The mount can be flipped for rise installation when the receiver sits lower than the trailer coupler. Exceeds SAE Class III standards. Drop capacity: 7500 lbs. The 6 inch drop model is rated 7500 lbs in drop orientation and 6000 lbs in rise orientation. Choosing the right drop: the drop measurement is the vertical distance from the centerline of the receiver tube to the centerline of the ball. Park on level ground, measure from the center of the receiver down to the center of the trailer coupler socket, and select the drop that matches. Available in 2 inch drop with 3/4 inch rise, 4 inch drop with 2 inch rise, and 6 inch drop with 4 inch rise. Select the size above. Better Boat is a family owned American company based in Miami Beach, Florida.