10in1U Metal Network Rack Mount for UniFi Lite 8 PoE Switch Ubiquiti USW-LITE-8-POE 52W — Open-Box, 15% Off

Fits USW-LITE-8-POE: Made for the USW-LITE-8-POE 52W. All cutouts line up with the ports, power input, and LED. No blocked ports, no gaps. Slide in, mount it, done. Switch + Adapter in 1U: Main bay holds the switch. Side compartment holds the power adapter, secured with the included Velcro straps. Both fit in one rack unit. No loose adapter hanging behind your rack. Fully Metal And Durable: Made from cold-rolled steel and coated with powder paint. This 10in1U Metal Network Rack Mount is not prone to bending or breaking, and is corrosion-resistant. Unlike plastic brackets, it won't deform or crack when heated. Open Cooling: Open top and vented floor let air move around the switch. Installs in 10 Minutes: Everything is in the box: cage nuts, rack screws, small screws, washers, rubber feet. Mount the tray, slide in the switch, strap the adapter. Built for the USW-LITE-8-POE — Metal, Not Plastic

The USW-Lite-8-PoE is a powerful compact switch — but its desktop form factor doesn't belong in a rack. This 10-inch 1U metal tray solves that. No 3D-printed compromises, no zip-tie hacks. Just a proper rack-mount solution.

🔧 EVERYTHING INCLUDED
One box. All the hardware:
1 × Metal rack mount tray (10" W × 7.9" D × 1.75" H)
4 × M4 rack cage nuts
4 × M4 rack screws
4 × Small mounting screws
4 × Flat washers
4 × Adhesive rubber feet
2 × Velcro cable straps

🛡️ METAL WHERE COMPETITORS USE PLASTIC
Most USW-Lite-8-POE rack mounts on Amazon are 3D-printed PETG. They work — until the rack gets warm. PETG softens at 85°C (185°F). Enclosed racks running PoE gear can reach 40-50°C easily. Over time, heat cycling causes plastic brackets to warp, crack, and sag. Our tray is cold-rolled steel with a baked-on powder coat — it doesn't care about rack temperature. It doesn't burn. It doesn't bend.

📦 SWITCH + ADAPTER, SIDE BY SIDE
The L-shaped tray design gives each device its own space. The main bay cradles the switch with precision-cut openings for all 8 Ethernet ports, the DC power input, and the LED indicator. The side compartment holds the external 52W power brick, secured by two included Velcro straps routed through the ventilation slots. No dangling adapters, no wasted rack units.

⚡ 10 MINUTES FROM BOX TO RACK
This is not a DIY project. It's a purpose-built bracket. Bolt the four cage nuts into your 10-inch rack rails, attach the tray with the included screws, slide in the switch, strap down the power adapter, and close the rack. If you've mounted equipment before, you'll be done in under 10 minutes.

🌬️ STAYS COOL UNDER POE LOAD
The open-top design and grid of ventilation slots let heat escape naturally — no fans, no noise, no trapped hot air. For a switch delivering PoE power to cameras, access points, and phones, passive cooling matters. Plastic enclosures trap heat and accelerate component aging. This tray lets your switch breathe.

⚙️ 10-INCH RACK STANDARD
EIA-310 compliant for 10-inch cabinet form factor. Fits mini racks, structured media enclosures, desktop network cabinets, and compact wall-mount racks. The 1U height leaves plenty of room for patch panels, gateways, and other gear above and below.

IDEAL FOR:
Home lab users building a compact UniFi stack
Small office network closets with 10-inch racks
Installers who want a clean, metal alternative to 3D-printed brackets

Please Note: Ubiquiti switch and power adapter shown in images are for demonstration only. Product includes rack tray and mounting hardware only.