10Base-T RJ45 to 10Base-5 DB15M AUI Transceiver, Thicknet Media Converter — Open-Box, 9% Off
Brand: ADnet
Description
CONNECTS A 10BASE-5 THICKNET AUI PORT TO A 10BASE-T RJ45 NETWORK - Provides a DB-15 male AUI connector and an RJ-45 jack, so a Thick Ethernet host attaches directly to modern twisted-pair Ethernet. The host may be a Thick Ethernet interface card or a 10BASE-5 repeater. IEEE 802.3, 10 Mbps baseband.
NO EXTERNAL POWER SUPPLY REQUIRED - The transceiver draws its power from the AUI interface itself, as the 802.3 AUI specification provides. There is no adapter to source, no mains outlet needed at the equipment, and nothing to fail separately from the unit.
SQE SWITCH - A two-position switch enables or disables Signal Quality Error, which verifies that the collision-detect circuit is operational. Set SQE ON when the host is a computer or interface card. Set SQE OFF when the host is a repeater. Getting this wrong is the usual cause of a link that comes up but passes no traffic.
FOUR DIAGNOSTIC LEDS - Power/Tx, Collision, Link/Rcv and Jabber are indicated separately. On legacy plant the far end is typically an instrument or controller with no network diagnostics of its own, so these indicators are the diagnostics.
10 MBPS PROTOCOL CONVERSION, NOT DISTANCE EXTENSION - Both 10BASE-5 and 10BASE-T are 10 Mbps standards. The unit converts between media and does not negotiate 100 or 1000 Mbps. The RJ-45 side observes the normal 100 m (328 ft) UTP limit; it does not lengthen a run.
BUILT FOR EQUIPMENT THAT CANNOT BE REPLACED - Typical hosts are 1980s and early-1990s Thick Ethernet interface cards in minicomputers, laboratory and test instruments, PLC and SCADA controllers, CNC and machine-tool systems, and telemetry equipment whose vendor no longer supplies AUI hardware.
IN THE BOX - Transceiver unit and manual. Nothing else is required: there is no power adapter to place and no configuration to enter. 0 to 55 C (32 to 131 F) operating, 10 to 90% humidity non-condensing, baseband signalling.
AN-10BT-10B5 media converter / transceiver converts 10Base-5 signals via a DB15M/ AUI connector to standard RJ45 plug for 10Base-T Ethernet for transmission over Unshielded Twisted-Pair cable. AN-10BT-10B5 converter provides both an AUI connector and RJ-45 jack to facilitate direct connection from Thick Ethernet Host to 10BASE-T Ethernet network. The host can be a Thick Ethernet card, or a 10Base-5 repeater. SQE function switch is used to enable Signal Quality Error function. This signal verifies that the collision detect circuit in the transceiver is operational. If the Host to which the transceiver is connected is a computer, set the SQE switch to ON. If the Host is a repeater (coaxial cable use), set the SQE switch to OFF.
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-us-b096rjzh18
- Model:
- AN-10BT-10B5
- Country:
- US
- ASIN:
- B096RJZH18
Shopping Smarter
Common questions about buying open-box and refurbished.
















