TOGU TG-6013 1200mm / 48 inches Square/Rectangle shape Push-Pull Stainless-Steel Door Handle for Entrance/Entry/Shower/Glass/Shop/Store, Interior/Exterior Barn & Gates - Brushed Stainless Steel Finish — Open-Box, 5% Off

1.Quality Heavy Duty 1.2mm thick, high-endurance 304-grade stainless steel for rust, stain, and corrosion resistance, Solid Premium Grade-304 Connection base and spindle screws leads for a very long durability and lifespan. 2.The Square/Rectangle shape is finished in perfect smooth brushed stainless steel and has a length of 1200mm/48inches , hole to hole distance 1162mm/45.74inches, Cross-Section Specification 25X38mm or 0.98X1.5inches (FrontXSide) to fit most doors up to door thickness 2.56 inches. 3.All accessories (Allen wrench, spare set screws) included, very easy installation. 4. Each purchase comes as a PAIR of door pulls for inside and outside of a single door. For double doors, 2 pairs are required. 5. Applications: Entry/Entrance door handle, wood or glass door pulls, interior/exterior front doors, shops, shower bathroom, kitchen cabinets, gate, wine cellars, barn sliding door knob from small to large/big, please kindly note TOGU door handles/pulls itself do NOT lock and is used in conjunction with deadbolts hardware and/or door catches. Brand: TOGU

Handle Material: 100% 1.2mm thickness Premium Grade-304 Stainless Steel

Handle Technology: Smooth edge chamfering process technology

Connection base and spindle screws material: 100% Solid German Standard Premium Grade-304 which will result in a very long durability and usage.

Total length: 1200mm / 48 inches

Center-to-Center Mounting Distance: 1162mm/45.74 inches

Attention: If you are purchasing new handles for the replacement of the old ones, the allowable tolerance for existing hole to hole distance is 1162mm/45.74 inches(+/-)1mm/0.04inches.

Cross-Section Specification: 25x38mm or 0.98X1.5inches (FrontXSide)

Finish: Full Brushed Stainless Steel

Door Type: Mountable on all types of doors including but not limited to glass and wooden doors, works up to 2.36 inches door thickness.

Note: Each purchase comes as a PAIR of door pulls for inside and outside of a single door. For double doors, 2 pairs are required.

Steps for Installation:

Drill and create two end to end holes between 0.315 - 0.600 inches (0.375 is recommended) on the door with a Center-to-Center Mounting Distance.

Use the Hexagonal Allen wrench to lose the hex socket set screws in the top and bottom pull connection base, remove apart the inner side and outer side of the door pulls.

Put the inner side pull handle and outer side pull handle aligning at each other and tighten the 4 pieces of the hex socket set screws in the top and bottom pull connection base. This completes the installation process.

Product package: 1 pair of back to back handles.

Warranty Description : Limited Lifetime Replacement Warranty.