SSimder 5 in 1 MIG Welder, 140A Pulse Spot Dual Voltage Portable — Open-Box, 17% Off

5-in-1 Welder with Pulse and Spot: Flux Core MIG, Lift TIG and Stick each run on their own, and Pulse can be switched on inside any of the three by holding MENU for five seconds — pulse alternates peak and background current so the puddle cools between cycles instead of running away on thin sheet. SPOT adds a 0.1 to 5 second tack timer that fires an identical burst on every trigger pull, which is what makes body panels repeatable. Five processes, one 7.76 lbs unit

110V and 220V, With the Real Numbers: Plug into a standard household outlet for 116A at a 35% duty cycle, or use the included conversion cord on a 220V circuit for the full 140A at 35% (108.4A at 100%). Flux core output runs 35 to 140A on 220V and 35 to 116A on 110V; Stick 20 to 140A; Lift TIG 15 to 140A. That covers 1/8 in (3.2 mm) mild steel in a single pass on 220V, and body-panel gauge on 110V with 0.030 in wire

Synergic Control Takes the Guesswork Out: Dial in the wire diameter you loaded — 0.030 in (0.8 mm) or 0.035 in (1.0 mm) — and the machine sets voltage and wire speed to match, so there is no chart to read before your first bead. ARC FORCE on Stick sets how hard the machine pushes current when the arc shortens, keeping the arc lit through rust and mill scale on fence posts and trailer steel

Built for Body Panels, Fences and Farm Repairs: Spot tacks hold quarter panels and rocker panels without warping, Pulse runs cool enough for thin sheet, and Stick with ARC FORCE burns through rusty gate frames and trailer patches. Flux core needs no cylinder, so it welds outdoors in wind where gas shielding would blow away. 7.6 lb with a carry handle fits on a shelf or in a truck bed between jobs

Everything Needed for a First Flux Core Weld: The box includes a 14AK MIG torch, electrode holder, ground clamp, a 1 lb spool of 0.030 in flux core wire, three torch accessories, a 110V to 220V conversion cord and the manual. A standard WP17V Lift TIG torch is sold separately, and no gas regulator or cylinder is included because flux core does not need one

The SSIMDER MIG-140S is a 140A 3-in-1 welding machine for flux core MIG, stick ARC and lift TIG. 110V/220V dual voltage input and IGBT inverter technology suit DIY users, beginners and home repair tasks. Synergic control auto-matches welding parameters to simplify setup for new users, with manual override for experienced welders. At 7.76 lbs with a carry handle, the portable IGBT design is easy to move between garage, workshop, farm and truck. Gasless flux core welding needs no shielding gas cylinder — convenient for outdoor fence repairs, farm gate fixes and automotive exhaust work. Compatible materials: mild steel and carbon steel with flux core wire. Supports 0.030" and 0.035" flux core wire, E7018 and E6013 stick electrodes. Lift TIG mode requires a separately purchased NWP-17V-10 torch. Included: MIG torch, ground clamp, electrode holder, 1 lb flux core wire, brush, voltage adapter and manual.