SoulBay 12V 1A AC Adapter Charger Replacement w/8 Tips, Regulated Power Supply Cord for LED Strip Light, CCTV Camera, BT Speaker, GPS, Webcam, Router, DC12V Transformer with ETL Certificate

• 12V POWER SUPPLY: ETL and RoHS certified, it features triple protection against overvoltage, overcurrent, and short circuit, eliminating safety hazards. Important Note: If the device "does not work," first confirm that it is powered by 12V DC and that the current is ≤1A (12-month replacement service is available for non-parameter issues) to avoid misidentifying product failures due to parameter mismatches • CORD Length: The 150cm/5ft long cable is sufficient for daily use, eliminating the limitations of short cables. Key markings: The center positive (+) must match the polarity of the device (reverse connection will result in malfunction). The device must meet the "12V DC + Current ≤1A" standard. AC/AC 12V devices are not supported, preventing startup failures caused by polarity/parameter mismatches from occurring • SPEC: Universal 100-240V AC input (50/60Hz 0.3A), stable 12V 1A DC output (MAX); compatible current range: Only supports 12V DC devices with current ≤1A (such as 50ma-1000ma routers and small speakers); strictly prohibited for use with devices of 1.5A/2A/3A and above (such as high-power appliances) to avoid malfunction or damage due to current overload • 8 Adapter Tips: Covers 8 common DC interfaces with specific applicable scenarios: ①2.5*0.7mm (small routers/cameras) ②3.5*1.35mm (LED night lights/Bluetooth speakers) ③4.0*1.7mm (some GPS devices) ④4.8*1.7mm (entry-level LED light strips) ⑤6.3*3.0mm (old-fashioned surveillance cameras) ⑥LED terminal connector (DIY LED light string) ⑦5.0*1.0mm (with pins, adapted for certain small home appliances) ⑧6.0*4.4mm (with pins, adapted for some LED lights) Please check the device interface size before purchasing. If you are unsure, you can provide consultation on the device model to avoid the "no suitable connector" problem • PACKAGE included: Includes one 12V 1A adapter and eight connectors. Applicable devices: CCTV cameras powered by 12V DC and drawing ≤1A, LED light strips (not high-power models), keyboards, low-power Bluetooth speakers, GPS, webcams, routers, and DIY electronic projects. Incompatible devices: Balance bikes, computers, 12V AC/AC devices, and devices requiring more than 1A, avoiding "incompatibility" Parameter:

Model: MKS-1201000H
Input: AC 100-240V – 50/60Hz 0.3A
Output: 12V 1000mA
Adapter Dimension: 60*40*35mm
DC Cord Connector: 2.1*5.5 mm
Cord Length: 1.5m/ 5 ft/ 59 inch

Multi Interchangeable Tips:

Different size, to work with most appliances and replace your missing or broken power cord.

Wide Applications for: home security camera, led strip light, CCTV camera, IR camera, Arduino project
led tape light, some battery-run model, keyboard, bt speakers, cd player, monitor, GPS, webcam, digital frame, DIY project and so on!

Tips Specifications:

H: 0.7*2.5mm
H-Red: 1.35*3.5mm
G: 1.7*4.0mm
F: 4.8*1.7mm
B: 6.3*3.0mm
A:6.0*4.4mm(pin inside)
H-Yellow: 5.0*1.0mm(pin inside)
Green: LED terminal connector.

Instructions on how to choose a suitable adapter:

a. Voltage match, rated at 12V dc output
b. Same connector diameter(please check the tip dimension before ordering!!!)
c. Current is over or equal to the power of your original
d. Polarity is the same

Package Included:

1 x 12V 1000mA ac adapter
8 x Adapter tips

Friendly Reminder:

(1). This power adapter is AC to DC 12V only, NOT AC to AC.
(2). Current load is 1A max.