Sonance Professional Series 4" In-Ceiling Speaker (Pair) — Open-Box, 16% Off

This is an Open Box Product. It's been inspected and is fully functional. It includes all original accessories and a 1-year warranty (unless noted otherwise below). For return details, see the Return Policy tab. The product's specs are as follows:

The PS-C41RT features a 4” polypropylene cone, butyl rubber surround woofer combined with a coaxially mounted .75” cloth dome, ferrofluid cooled high tweeter.

The PS-C41RT features extremely flat response for natural musically and intelligibility for voice, making it perfect for shopping malls, airports, schools, corporate, government, or anywhere an affordably-priced, aesthetically pleasing, and excellent sounding loudspeaker is required.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-C41RT is certified for UL2043, UL1480, as well as EN54-24.

Specifications

Frequency Range (-10dB) - 70Hz – 25khz
Frequency Range (-3dB) - 95Hz – 20kHz
Power Capacity - 60 Watts Continuous Program Power | 30 Watts Continuous Pink Noise
Nominal Sensitivity - 87dB
Nominal Coverage Angle - 120 degrees conical coverage
Directivity Factor (Q) - 7.6
Directivity (DI) - 8.1dB
Rated Maximum SPL - 102dB @ 1 meter (3.3 feet) average, 108dB peak
Rated Impedance - 8 Ohms nominal, 6 Ohms minimum
Transformer Taps - 25W, 12.5W, 6.3W and (3.2W @70V)
Crossover Point - 3000Hz
Overall Dimensions - 6.3" x 6.5” deep (160mm x 165mm)
Cut Out Dimensions - 5.875" Diameter (149mm)
Net Weight - 5.0lbs (2.27kg) ea
Unit of Measure - Pair (Single units upon request)
Grille - Supplied with bezel-less white grille. Optional black grille, or square adapter with black or white grille
LF Driver - 4" (100mm) Polypropylene Cone, Butyl Rubber Surround
HF Driver - .75" (19mm) Cloth dome, Ferrofluid cooled
Input Connector - Four pin, Euroblock with loop output connections
Knockout - Single .75" with cable relief
Safety Agency - UL 2043, UL 1480, NFPA 90A and NFPA 70, S7232, (EN54-24 coming soon)
Ceiling Thickness Range - .125” - 2.0” (3mm - 50mm)
Suspension Points - One, on top surface
Included Accessories - Bracket/Tile Bridge