Morec 40A EV Charger Extension Cable 20FT,100% Pure Copper Heavy-Duty Charging Cord for Electric Vehicle 220V-240V, Compatible with All SAE J1772 EVs, TPU Jacket for Indoor Outdoor Use — Open-Box, 5% Off
Brand: Morec
Description
20FT EXTRA REACH — CHARGE WITHOUT REPOSITIONING YOUR EV — Extend your existing J1772 charging cable by 20FT when the charger cannot comfortably reach your vehicle. Ideal for garages, driveways, multi-car parking and compatible public AC charging stations. A practical everyday length that adds useful reach without excessive cable to carry, coil and store.over 20000+ times plug and play.
3 SAME-GAUGE 9AWG MAIN CONDUCTORS — BUILT FOR 40A — Unlike mixed-gauge cable construction, all three Morec main conductors use the same heavy-duty 9AWG gauge, paired with a 16AWG control conductor. The balanced 3×9AWG main-conductor design provides substantial copper capacity for consistent 40A power transfer and more uniform thermal performance during extended charging sessions.
MORE COPPER WHERE IT MATTERS — 100% PURE COPPER. Built with a heavy-duty 3×9AWG + 1×16AWG pure copper conductor, providing a massive 21.2mm² total cross-sectional area. That is 10% more copper than standard mixed-gauge cables (e.g., 2×9AWG + 1×10AWG + 1×18AWG), ensuring ultra-low resistance, minimal heat, and stable power transfer across the full 20FT extension.
DURABLE TPU JACKET — FLEXIBLE FROM -25°C TO +55°C — Tough on the outside and pure copper inside. The durable TPU cable jacket is designed to withstand repeated bending, abrasion and everyday handling while remaining flexible across changing temperatures. With an operating range of -25°C to +55°C, it is made for year-round charging from cold winter driveways to warm summer days.
IP67 WHEN CONNECTED — SAE J1772 COMPATIBLE — Designed for SAE J1772 AC charging connections and compatible with J1772-equipped EVs and PHEVs. The weather-resistant connector system is rated IP67 when properly mated, helping protect against dust and water exposure during outdoor charging. Supports up to 40A at 220V-240V with compatible charging equipment and vehicles.
40A / 20FT J1772 Extension Cable Built with 3×9AWG + 1×16AWG 100% copper conductors for stable 40A charging. The three main conductors use the same 9AWG gauge—no downsized power or ground conductor—for better thermal symmetry and long-term reliability. Overall cable diameter approx. 17.5 mm. Upgraded 16AWG Control Wire The CP conductor uses 16AWG wire, about 59% more copper cross-section than 18AWG, improving mechanical strength and long-term durability in daily plugging and outdoor use. More Copper Than Common Mixed-Gauge Cables Total conductor cross-section approx. 21.2 mm², about 9.6% more copper than other designs, helping reduce resistance and heat during continuous 40A charging. 20FT Practical Reach 20FT extends your charging reach without unnecessary extra cable weight. Compatible with SAE J1772 chargers and EVs; IP67 rated when properly mated. When your EV charger reaches the driveway—but not quite your charging port—Morec gives you the extra reach you need without replacing your existing charging setup. The Morec J1772 EV Charger Extension Cable adds 20FT of practical charging reach, making it easier to connect vehicles parked farther from a home wall charger, portable EVSE or compatible public J1772 AC charging station. What makes this extension cable different is what is inside. Instead of relying only on a 40A rating, Morec uses three same-gauge 9AWG main conductors, combined with a 16AWG control conductor. The 3×9AWG + 1×16AWG construction provides approximately 21.2mm² of total nominal conductor cross-sectional area, giving the cable substantial pure-copper construction for reliable power transfer during demanding charging sessions. The 100% pure copper conductors are protected by a durable TPU outer jacket designed for repeated bending, abrasion and everyday handling. With an operating temperature range of -25°C to +55°C, the cable is ready for changing seasons and everyday indoor or outdoor charging environments. The weather-resistant connector system is rated IP67 when properly connected, helping protect the charging connection from dust and water exposure. Designed for SAE J1772 AC charging, the extension cable supports up to 40A at 220V-240V, or up to 9.6kW at 240V when supported by the vehicle, EVSE and electrical supply. Morec J1772 Extension Cable 20FT extension length Up to 40A 220V-240V AC 3×9AWG main conductors 1×16AWG control conductor 100% pure copper conductors Durable TPU cable jacket -25°C to +55°C operating temperature IP67 when properly mated SAE J1772 compatible Model: BS-CHC011-40A Note: This product is an extension cable for compatible SAE J1772 AC charging equipment. It does not increase the charging power of your existing charger. Actual charging speed is determined by the vehicle, EVSE and electrical supply.
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-ca-b07hrhyqy2
- Model:
- BS-CHC011-40A
- Country:
- CA
- ASIN:
- B07HRHYQY2
- UPC:
- 631145121598
Shopping Smarter
Common questions about buying open-box and refurbished.
Why buy refurbished or open-box?
What's the difference between open-box and refurbished?
Why use OpenBoxFox?
Is it safe to buy refurbished?
More open-box deals
Updated daily from Amazon, Reebelo, and Dyson.

















