ELEGOO PLA+ Filament 1.75mm True Red 1KG, High Toughness PLA Plus 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs) Fits for Most FDM 3D Printers

• ENHANCED TOUGHNESS & STRENGTH: ELEGOO PLA Plus offers improved mechanical properties over standard PLA, providing increased impact strength and toughness for more robust prints • TOP-NOTCH ACCURACY & CONSISTENT: Advanced measurement procedures used during manufacturing, ensure filament is 1.75mm in diameter, accuracy +/- 0.02 mm, providing consistent and smooth feeding • LESS-TANGLE & NEATLY WOUND: Full mechanical winding and strict manual inspection ensure that all pla+ filaments are neatly wound, which effectively reduces tangles, snaps and line breakage issues • GLOSSY SURFACE & EASY TO USE: Strong layer adhesion, low warping, and shrinkage help achieve excellent and successful 3D printing results. The lower printing temperature makes it very easy to print and set up. • NO CLOGGING & NO BUBBLE: ELEGOO PLA Plus Filament is complete dried before packaging and vacuum sealed well to protect the filament from moisture, no clogging and bubbling problems

Tips for Use: 

Please pass one end of the filament into the fixing hole to avoid tangling after finishing printing.

Since PLA+ filament is sensitive to moisture, please remember to store it in a resealable foil bag promptly after unsealing to maintain excellent printing performance.

Parameters

Recommended Extrusion/Nozzle Temp: 200 - 230°C

Recommended Heated Bed Temp: 35-65°C

Dimensional Accuracy 99% Probability: +/- 0.02mm

Printing Speed: < 280  mm/s

Net Weight: 1 kg/spool (2.2 lbs)

Fill: 100%

Density: 1.30 g/cm³

Tensile strength (X-Y) : 38 ± 2 MPa

Elongation at break (X-Y) : 7.9% ± 1.6%

Bending modulus : 2979 ± 156 MPa

Bending strength : 74 ± 4 MPa

Impact strength : 65.5 ± 3.6 kJ/m²