ELEGOO PLA+ Filament 1.75mm Black/White 4KG 3D Printer Filament — Open-Box, 28% Off

【Brand New PLA+ Filaments】Made of American Natureworks 4032D eco-friendly raw material, which features low warpage and shrinkage, excellent printability, high strength, good ductility, and odorless when printing.

【Tough & High Impact Strength】With enhanced toughness and better tensile strength, ELEGOO PLA+ has even higher impact strength and less brittleness & deformation than usual PLA. Meanwhile, the better cooling effect makes the overhang printing effect better and higher success rate of printing suspended models.

【Glossy Surface & Good Layer Adhesion】Accurate deposition and strong layer bonding bring a smoother surface finish without layer delamination issues. The lower printing temperature and stable thermoforming dimensions make it very easy to print with excellent print quality.

【Less-tangle & Neatly Wound】Full mechanical winding with secondary sub-winding and strict manual inspection ensures that the lines are neatly arranged on the reels, which effectively reduces the occurrence of crossed turns and tangles and avoids possible snap and line breakage. With an eco-friendly design in mind, our PLA+ adopts the cardboard spool, which degrades faster than plastic spools and is more eco-friendly.

【Dimensional Accuracy & Consistency】 Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and optimal flow through the extruder for these 1.75mm PLA+ filaments with a dimensional accuracy of +/- 0.02mm.

Tips for Use: Please pass one end of the filament into the fixing hole to avoid tangling after finishing printing. Since PLA+ filament is sensitive to moisture, please remember to store it in a resealable foil bag promptly after unsealing to maintain excellent printing performance. Recommended Printing Settings Nozzle Temperature: 200 - 230 °C Bed Temperature (varies depending on printer and build plate type): 35 - 65 °C Printing Speed: < 280 mm/s Physical Properties Density: 1.3 g/cm³ Mechanical Properties Tensile Strength (X-Y): 38 ± 2 MPa Elongation at Break (X-Y): 7.9% ± 1.6% Bending Modulus (X-Y): 2979 ± 156 MPa Bending Strength (X-Y): 74 ± 4 MPa Impact Strength (X-Y): 65.5 ± 3.6 kJ/m²