CENTALL 3/4” Electric Hydraulic Rebar Cutter Tool 1.5-2s RC20B (Orange) — Open-Box, 13% Off

Wide Cutting Range & Fast Cutting Speed: Electric rebar cutter adopts the core technology of four-plunger pump body, which has powerful motivation and strong cutting force. Cutting speed 1.5-2s, which can highly improve work efficiency and satisfy your various cutting demand. Cutting capacity ranges from 3/20"(4mm) to 3/4"(20mm)

High-Quality Blade: Upgraded Cr12MoV blades that would not deform easily and provide you with longer service life. Sophisticated blade processing technology and strict quality control. Multiple screw fixed heads can offer quick and accurate cutting while providing double stability and sealability

Safe Reliable & Low Noise: Rebar cutting machine runs smoothly, driven by hydraulic pumps, with pure copper coil motor 1000W, so that the machine has low noise and low failure rate, which is very helpful for work. Cutting process has no excess sparks and dust

One Button Operation: Simply press the button and begin cutting in seconds to finish your accurate cutting and raise your working efficiency greatly. The handle of the hydraulic rebar cutter is ergonomically designed for easy operation

Widely Used & Cut Rebar Types: The electric rebar cutter is mainly used in construction sites, such as railway construction, bridge construction, building a house, roads, interior & outdoor decoration and other places where the rebar needs to be cut off. Cutting rebar types for medium-carbon rebar, low-carbon rebar, round rebar, threaded rebar etc

Powerful Motor Specifications: Features a 1000W pure copper coil motor that delivers consistent hydraulic power for efficient cutting performance, ensuring reliable operation throughout extended work sessions on demanding construction projects

Attention It is strictly forbidden to cut materials exceeding the specified diameter and strength to avoid affecting the service life of the machine. Release the switch immediately after one cutting is finished. It is strictly forbidden to continue pressing the switch, so as not to damage the hydraulic bearing and motor. After cutting dozens of times, it is normal for the pump body to heat up. Be sure to let the machine rest for cooling down to normal temperature before restart to use, so as not to damage the pump body and seals due to high temperature inside. Regularly check whether the screw of the pressure relief valve is loose and tighten the screw to avoid oil leakage to affect the cutting use. Replace the hydraulic oil regularly, usually every 1-2 months.