AODELAN WTR-2 Camera Wireless Shutter Release Timer Remote Control — Open-Box, 26% Off

It includes a Timer and a Receiver, can work as a timer and remote shutter release. For shutter release mode: Single shooting ,continuous shooting, bulb exposure and 2 second delay modes are available for shutter control Multiply timer functions: delay timer, long exposure timer interval timer, setting for the number of exposure and BKLN function. Under timer mode, delay exposure, long exposure, interval, exposure number function can be programmed together to capture the beautiful moments with repeat interval time and repeat times shooting Its timing setting can be accurate to 0.1 seconds. Supports BKLN Function: Bracketed Long Exposure function allows a group of photos to be taken at automatically exponentially changing exposure times, useful for low-light multiple exposure HDR images. 2.4GHz wireless transmission, distance up to 60M. LCD display is useful for operating on a sunny day or in the dark Compatiable with: Panasonic: DC-S1R, DC-S1, DC-G95, DC-S1H, FZ100, FZ150, FZ200, FZ300, FZ330, FZ1000, FZ2000, FZ2500, Lumix, DMC-G1, DMC-G10, DMC-G2, DMC-G3, DMC-G5, DMC-G6, DMC-G7, DMC-G85, DMC-GF1, DMC-GH1, DMC-GH2, DMC-GH3, DMC-GH4, DC-GH5, DC-GH5S, DMC-GX1, DMC-GX7, DMC-GX8, DMC-L1, DMC-L10; DMC G70W, G70K, G70KA, G70M, G70H, G80, G80M, GX80K2, G81, G81H, G81M, L1, L10, LC-1 Compatiable with: Olympus E-M1, E-M5 Mark II, E-M5, E-M10 Mark II, E-M10, PEN-F, E-P5, E-P3 E-P2, E-P1, E-PL8, E-PL7, E-PL6, E-PL5, E-PL3, E-PL2, E-PM2, E-PM1, SP-510UZ, SP-550UZ, SP-560UZ, SP-570UZ, XZ-1. Leica: V-Lux 4. NOT FIT FOR: OM-D E-M1 Mark II AODELAN WTR-2 includes a Timer WTR-2(T) and a Receiver WTR-2(R). It works as a wireless timer and remote shutter release system with the Receiver connecting to the camera and the Timer controlling the receiver. Also, the Timer WTR-2(T) can work as a wired system with it connecting to the camera directly.
Besides the full functions of shutter release, it also features multiply timer functions: delay timer, long exposure timer, interval timer and as well as setting for the number of exposure; its timing setting can be accurate to 0.1 seconds. The WTR-2 is great for time-lapse recording of blooming flowers, astrophotography, etc.

Specification
Frequency: 2.4 GHz
Range: 60 meter
Working voltage: 3.0 V
Standby Timer: 48 Hours
Batteries: 4 x AAA batteries
Size: Transmitter: Approx. 130 x 46 x 22 mm (5.1 x 1.8 x 0.9 in), Receiver: Approx. 85 x 37 x 31 mm (3.3 x 1.5 x 1.2 in)
Weight: Transmitter: Approx. 56.5g (2.0 oz) (without batteries), Receiver: Approx. 37.5 g (1.3 oz) (without batteries)

Note: Please check the frequency of transmitter and receiver is matched if the wireless remote system doesn't work. To reset the smart code, please follow the procedures:
1. Turn on the transmitter and receiver.
2. Use a needle-like object to press into the code setting button on receiver, which will cause the LED on receiver to flash red and green light alternately for 25s. Press the shutter button on transmitter to reset the code during the code setting mode. When the code is successfully set, the LED on receiver will get back to normal mode, flashing green light.

A transmitter can control multiple receivers simultaneously.
Normally, the frequency of transmitter and receiver will be pre-set in production.