Alarm.com Emergency Call Button ADC-EPB-BC2.1-GE — Refurbished, 37% Off

• Refurbished (Good) Alarm.com Emergency Call Button ADC-EPB-BC2.1-GE
• The Alarm.com ADC-EPB-BC2.1-GE is a stationary emergency button with an Interlogix/Qolsys transmitter for secure independent home care and senior living.
• The ADC-EPB-BC2.1-GE emergency button grants caregivers real-time insight into each client's current conditions as well as potential emergency problems.
• This device requires an Alarm.com account, your Alarm.com partner will need to work with you to add Alarm.com devices to your account.
• Alarms247 offers DIY monitoring packages to support these devices.

Product Programming:
• Use the Alarm.com AirFX "Add a Sensor" page or the panel interface to add the button to the account. Set the "New Sensor Information" as shown in the chart. For enrolling the device at the panel, the sensor can be tampered with by pressing the button within the first two seconds that the On/Off switch is set to the "On" position. Please note that group 4 should be used if the button is used to signal an emergency. Group 40 or group 27 can be used if the button is not being used to signal an emergency.
• After the sensor is added to the system, change the sensor type to "Push Button." From the Equipment page of the Dealer Website click Change to the right of the sensor's name. Select the "Change Sensor Type" action, and update the new sensor type to "Push Button."

Product Programming:
• Sensor ID Select an unused ID
• Zone Definition 4 (Emergency) or 40 (Non-Emergency)
• Sensor Name Any
• DL Code On the bottom of the sensor